User manual LITTERMAID LME5500

[. . . ] Please Read and Save this Use and Care Book USA/Canada 1-800-LITMAID 1 (800) 548-6243 www. littermaid. com Accessories/Parts (USA/Canada) 1-800-738-0245 Models LME5500 LME9000 LME9250 WELCOME TO THE FAMILY! Congratulations on your purchase of the LitterMaid EliteTM Advanced Automatic Self-Cleaning Litter Box. This product is designed to make caring for your cat a simpler, less time-consuming process. OPERATING INSTRUCTIONS FOR THE LITTERMAID® SELF-CLEANING LITTER BOX · Cat enters the unit; once he/she leaves, the sensors are triggered, setting the timer for the cleaning cycle. (Sensors need to be blocked for at least 5 seconds. ) Important: Unit will not start a cleaning cycle while cat is in the box. [. . . ] Note: If setting P. M. , be sure light in the upper left corner of the display is lit. is in the upper left corner of the LED display) to set the time you want the sleep mode to begin (for example, if you set the time for 10:00P. M. Sleep mode time is automatically accepted if no buttons are pressed for 3 seconds or more. Steady red light comes on to indicate that the sleep mode is activated. Ionic Air Cleaner: · As soon as the cat leaves the litter box, the sensor activates the 10-minute countdown and the ionic air cleaner. · The ionic air cleaner stays on during the countdown and the cleaning cycle. · If the sleep timer is activated the rake will not cycle for 9 hours from the set sleep mode time (the ionic air cleaner will automatically turn on every hour for 10 minutes). Optional Items: For more information: call, 1-800-738-0245; or visit our website, www. littermaid. com. LitterMaid Kitty KabanaTM litter box cover: · Assemble to cover unit (U). (See instruction sheet. ) U 10 Helpful Information: If you need to acclimate your cat to the LitterMaid® Advanced Automatic Self-Cleaning litter box, refer to ACCLIMATINg YOUR CAT in this use and care book. If your unit is not working properly, refer to TROUBLESHOOTINg in this use and care book. Important: When the ON/OFF button is in the Off position it only disables the rake function. · Unplug unit and remove batteries to prevent accidental activation of the unit. To ensure proper disposal of litter, follow manufacturer's instructions on litter package. If further cleaning is necessary, the litter tray can be fully immersed in water and washed with a mild detergent. Dry the unit completely before reassembling. LED operation, function and why they blink: Green on control panel Blinking green on control panel Power LED indicator is lit when power to the unit is on. LED blinks (1 time per second) when the rake assembly has encountered a blockage. Green on ionizer Red on control panel Blinking red on control panel Ionic air cleaner LED (behind the rake) is only lit when the ionizer is operating. Occurs during the sleep mode programming. 11 12 · Before reassembling, spray litter tray surface with nonstick cooking spray or silicone spray, and wipe with a soft, dry cloth. This will help to prevent waste clumps from adhering to the surface of the tray. Removing Disposable Waste Receptacle We recommend avoiding contact with waste material. Wear rubber or latex gloves when handling used disposable waste receptacle. [. . . ] Probable Cause: · Rake has encountered an obstacle it cannot remove. If the rake cannot move an obstacle during the cleaning cycle, the unit will go through a cleaning cycle up to five times in an attempt to clear the obstacle. If unsuccessful, the rake will return to its home position, and the green light will blink slowly (approximately once every second), indicating that the rake has encountered an obstacle it cannot move. Important: When the ON/OFF button is in the OFF position it only disables the rake function. [. . . ]