User manual LINKSYS WUMC710 AE6000

[. . . ] 3 Linksys WUMC710 Tjekliste for trådløs sikkerhed Tjekliste for trådløs sikkerhed Trådløse netværk er både praktiske og nemme at installere og bliver mere og mere almindelige i private hjem, hvor der er adgang til højhastighedsinternet. Klik på Save Settings (Gem indstillinger) for at anvende ændringerne, eller klik på Cancel Changes (Annuller ændringer) for at annullere ændringerne. setup (Konfiguration) > Basic Setup (Grundlæggende konfiguration) Den første skærm , der vises , er skærmen Basic Setup (Grundlæggende konfiguration). På dette skærmbillede kan du ændre sprog for det webbaserede hjælpeprogram eller netværksindstillingerne for mediestikkets kabelforbundne Ethernet-forbindelse. [. . . ] If your network router supports Wi-Fi Protected Setup and uses WPA or WPA2 security, then you can use Wi‑Fi Protected Setup to automatically connect the media connector. 7 Linksys WUMC710 Basic Wireless Settings WPA Personal Advanced Configuration WPA is a security standard stronger than WEP encryption. Network Name (SSID)  The SSID is the network name shared among all points in a wireless network. It is case-sensitive and must not exceed 32 characters (use any characters on the keyboard). Make sure this setting matches the setting on your wireless router or access point. Passphrase  Enter the key shared by the media connector and your wireless router or access point. Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes. Method #2 Use this method if your router requests the PIN number of the media connector. On the router’s Wi-Fi Protected Setup screen, enter the PIN number on the media connector’s Wi-Fi Protected Setup screen. The Wi-Fi Protected Setup screen displays the Link Status, Network Name (SSID), and Security method. 9 Linksys WUMC710 Advanced Configuration WPA Wireless > Wireless Network Site Survey Click the Wireless Network Site Survey tab to begin a site survey. The Wireless Network Site Survey screen lists the wireless networks detected by the media connector. Network Name (SSID)  The name of the network you selected is automatically displayed. Passphrase  Enter the key shared by the media connector and wireless router or access point. Wireless Network Site Survey Number of Wireless Networks  The number of wireless networks detected by the media connector is displayed. 100% is the strongest signal strength possible; 0% is the weakest possible. Security  If the network supports Wi‑Fi Protected Setup, the Wi-Fi Protected Setup icon is displayed. WPA2 Network Name (SSID)  The name of the network you selected is automatically displayed. Passphrase  Enter the key shared by the media connector and wireless router or access point. 10 Linksys WUMC710 WEP Advanced Configuration No Acknowledgement  If you want to disable the media connector’s Acknowledgement option so the media connector does not re-send data if an error occurs, select Enabled. Network Name (SSID)  The name of the network you selected is automatically displayed. Authentication  The default is Auto, which allows either Open system or Shared key authentication to be used. [. . . ] Velg Shared (Delt) for å bruke Shared Key-godkjenning – sender og mottaker bruker en WEP-nøkkel for godkjenning. Klikk på Save Settings (Lagre innstillinger) for å ta i bruk endringene, eller klikk på Cancel Changes (Forkast endringer) for å forkaste endringene. Re-enter to confirm (Skriv inn på nytt for å bekrefte)  Skriv inn passordet på nytt for å bekrefte det. Upgrade Firmware (Oppgrader fastvare) Please select a file to upgrade the firmware (Velg en fil for å oppgradere fastvaren)  Klikk på Browse (Søk), og velg filen med fastvareoppgraderingen. [. . . ]