User manual LINKSYS WRTP54G

[. . . ] ® A Division of Cisco Systems, Inc. 2. 4 GHz Wireless-G 802. 11g Voice Broadband Router with 2 Phone Ports User Guide Model No. WRTP54G Wireless-G Broadband Router with 2 Phone Ports Copyright and Trademarks Specifications are subject to change without notice. Other brands and product names are trademarks or registered trademarks of their respective holders. WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. How to Use this Guide Your guide to the Wireless-G Broadband Router with 2 Phone Ports has been designed to make understanding networking with the Router easier than ever. [. . . ] Make sure Work Offline is NOT checked. Appendix A: Troubleshooting Common Problems and Solutions 53 Wireless-G Broadband Router with 2 Phone Ports B. This is a hard refresh, which will force Windows Explorer to load new webpages, not cached ones. The Router, by default, assigns an IP address range of 192. 168. 15. 100 to 192. 168. 15. 150 using the DHCP server on the Router. To set a static IP address, you can only use the ranges 192. 168. 15. 2 to 192. 168. 15. 99 and 192. 168. 15. 151 to 192. 168. 15. 254. Each PC or network device that uses TCP/IP must have a unique address to identify itself in a network. If the IP address is not unique to a network, Windows will generate an IP conflict error message. You can assign a static IP address to a PC by performing the following steps: For Windows 98 and Millennium: A. In The following network components are installed box, select the TCP/IP-> associated with your Ethernet adapter. If you only have one Ethernet adapter installed, you will only see one TCP/IP line with no association to an Ethernet adapter. In the TCP/IP properties window, select the IP address tab, and select Specify an IP address. Enter a unique IP address that is not used by any other computer on the network connected to the Router. You can only use an IP address in the ranges 192. 168. 15. 2 to 192. 168. 15. 99 and 192. 168. 15. 151 to 192. 168. 15. 254. Make sure that each IP address is unique for each PC or network device. Click the Gateway tab, and in the New Gateway prompt, enter 192. 168. 15. 1, which is the default IP address of the Router. Enter the Host and Domain names (e. g. , John for Host and home for Domain). If your ISP has not provided the DNS IP address, contact your ISP to get that information or go to its website for the information. 54 Appendix A: Troubleshooting Common Problems and Solutions Wireless-G Broadband Router with 2 Phone Ports Click the OK button in the TCP/IP properties window, and click Close or the OK button for the Network window. Right-click the Local Area Connection that is associated with the Ethernet adapter you are using, and select the Properties option. In the Components checked are used by this connection box, highlight Internet Protocol (TCP/IP), and click the Properties button. Enter a unique IP address that is not used by any other computer on the network connected to the Router. You can only use an IP address in the ranges 192. 168. 15. 2 to 192. 168. 15. 99 and 192. 168. 15. 151 to 192. 168. 15. 254. Enter the Default Gateway, 192. 168. 15. 1 (Router's default IP address). [. . . ] An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack, which is FCC Part 68 compliant. Connection to the telephone network should be made by using the standard modular telephone jack. Appendix H: Regulatory Information 95 Wireless-G Broadband Router with 2 Phone Ports The REN is useful to determine the quantity of devices that may be connected to the telephone line and still have all of those devices ring when your telephone number is called. To be certain of the number of devices that may be connected to the line, as determined by the total RENs, contact the telephone company to determine the maximum REN for the calling area. [. . . ]