User manual LINKSYS WRT610N

[. . . ] USER GUIDE Simultaneous Dual-N Band Wireless Router Model: WRT610N (EU) About This Guide About This Guide Icon Descriptions While reading through the User Guide you may see various icons that call attention to specific items. Below is a description of these icons: NOTE: This check mark indicates that there is a note of interest and is something that you should pay special attention to while using the product. WARNING: This exclamation point indicates that there is a caution or warning and it is something that could damage your property or product. WEB: This globe icon indicates a noteworthy website address or e-mail address. Online Resources Website addresses in this document are listed without http:// in front of the address because most current web browsers do not require it. If you use an older web browser, you may have to add http:// in front of the web address. Resource Linksys Linksys International Glossary Network Security Website www. linksys. com www. linksys. com/international www. linksys. com/glossary www. linksys. com/security Copyright and Trademarks Linksys is a registered trademark or trademark of Cisco Systems, Inc. [. . . ] To access your USB storage, double-click Default. Map Network Drive Double-click Default Simultaneous Dual-N Band Wireless Router 35 Appendix B How to Install and Access USB Storage 3. The Default shared folder of your USB storage is listed under Network Drives. Click the Message Network Drive 4. Click Turn on network discovery and file sharing. To access your USB storage, double-click the Default shared folder. You can use the Default shared folder as another drive on your network. NOTE: Repeat steps 1-11 to map the USB storage to each XP computer on your network. Instructions for Windows Vista 1. Click Network. Click Turn on Network Discovery and File Sharing Click Network Simultaneous Dual-N Band Wireless Router 36 Appendix B How to Install and Access USB Storage 5. Double-click WRT610N listed in the Computer category (do not double-click WRT610N listed in the Network Infrastructure category). If you do not see the WRT610N listed in the Computer category, then enter the default server name, WRT610N in the Search field, and press the Enter key. See the Advanced Configuration section later in this Appendix for information on how to change the server name. Double-Click Default 8. To map the Default shared folder to your computer, right-click Default. Click Map Network Drive. Double-Click WRT610N (Computer Category) 6. In the User name and Password fields, enter the default User name and password, admin. If you want to change the password, see the Advanced Configuration section later in this Appendix. Keep the default Drive letter, or select the letter you want to use from the Drive drop-down menu. To access your USB storage, double-click Default. Map Network Drive Simultaneous Dual-N Band Wireless Router 37 Appendix B How to Install and Access USB Storage 10. The Default shared folder of your USB storage is listed under Network Location. Password Screen How to Create a Shared Folder 1. To create a shared folder, click Create Share. Network Drive To access your USB storage, double-click the Default shared folder. You can use the Default shared folder as another drive on your network. NOTE: Repeat steps 1-10 to map the USB storage to each Vista computer on your network, Advanced Configuration (Advanced Users Only) To manage access to the USB storage device, you can create shared folders, user groups, and user accounts. Follow the instructions in this section. How to Access the Web-Based Utility To access the web-based utility, launch the web browser on your computer, and enter the Router's default IP address, 192. 168. 1. 1 or http://wrt610n. com, in the Address field. (Non-Windows XP users will see a similar screen. ) Leave the User name field blank. The first time you open the web-based utility, use the default password admin. (You can set a new password from the Administration tab's Management screen. ) Click OK to continue. Storage > Disk Simultaneous Dual-N Band Wireless Router 38 Appendix B How to Install and Access USB Storage How to Create a User Group 1. In the Group Management section, click Create New Group. Shared Folder Screen Display Name Enter a display name that will appear in the Shared Folder table of the Disk screen. [. . . ] The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc. , code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft. Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. [. . . ]