User manual LINKSYS WRT160NL

[. . . ] USER GUIDE Wireless-N Broadband Router with Storage Link Model: WRT160NL About This Guide About This Guide Icon Descriptions While reading through the User Guide you may see various icons that call attention to specific items. Below is a description of these icons: NOTE: This tick indicates that there is a note of interest and is something that you should pay special attention to while using the product. WARNING: This exclamation mark indicates that there is a caution or warning and it is something that could damage your property or product. wEB: This globe icon indicates a noteworthy website address or email address. [. . . ] administration > Diagnostics Diagnostics Ping Test Ping checks the status of a connection. IP or URL Address  Enter the address of the PC whose connection you wish to test. Number to Ping  Enter the number of times you wish to test the connection. Administration > Factory Defaults NOTE: Do not restore the factory defaults unless you are having difficulties with the Router and have exhausted all other troubleshooting measures. Once the Router is reset, you will have to re-enter all of your configuration settings. Factory Defaults Restore All Settings  To reset the Router’s settings to the defaults, click this button and then follow the on‑screen instructions. Any settings you have saved will be lost when the default settings are restored. 28 Wireless-N Broadband Router with Storage Link Chapter 3 Advanced Configuration Administration > Firmware Upgrade The Firmware Upgrade screen allows you to upgrade the Router's firmware. Do not upgrade the firmware unless you are experiencing problems with the Router or the new firmware has a feature you want to use. Status > Router Administration > Firmware Upgrade Router Information Firmware Version  The version number of the Router’s current firmware is displayed. Firmware Verification  The unique identifier that verifies that you have valid firmware is displayed. Internet MAC Address  The Router’s MAC Address, as seen by your ISP, is displayed. Host Name  The Host Name of the Router is displayed (if it was entered on the Setup > Basic Setup screen). Domain Name  The Domain Name of the Router is displayed (if it was entered on the Setup > Basic Setup screen). Before you upgrade its firmware, write down all of your custom settings. After you upgrade its firmware, you will have to re‑enter all of your configuration settings. Firmware Upgrade Before upgrading the firmware, download the Router’s firmware upgrade file from the Linksys website, www. Please select a file to upgrade the firmware  Click Browse and select the firmware upgrade file. Start to Upgrade  After you have selected the appropriate file, click this button and follow the on-screen instructions. Internet Connection This section shows the current network information stored in the Router. The information varies depending on the Internet connection type selected on the Setup > Basic Setup screen. Status > Router The Router screen displays information about the Router and its current settings. [. . . ] Both the conditions of the OpenSSL Licence and the original SSLeay licence apply to the toolkit. This package is an SSL implementation written by Eric Young (eay@cryptsoft. The implementation was written so as to conform to Netscape's SSL. This library is free for commercial and non-commercial use as long as the following conditions are adhered to. [. . . ]