User manual LINKSYS WPC54GR

[. . . ] ® A Division of Cisco Systems, Inc. 2. 4 GHz 802. 11g WIRELESS Model No. Notebook Adapter with RangeBooster Wireless-G User Guide WPC54GR Wireless-G Notebook Adapter with RangeBooster Copyright and Trademarks Specifications are subject to change without notice. Other brands and product names are trademarks or registered trademarks of their respective holders. WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. How to Use this User Guide This user guide has been designed to make understanding networking with the Notebook Adapter easier than ever. [. . . ] Click Connect to Network to connect to your network, implement the new settings, and return to the Link Information screen. Figure 5-3: PSK2 Needed for Connection Congratulations!The profile has been successfully configured. Figure 5-4: Congratulations Chapter 5: Using the Wireless Network Monitor Create a New Profile 22 Wireless-G Notebook Adapter with RangeBooster Manual Setup If your network is not listed with the available networks, you can use Manual Setup. Click Manual Setup on the Available Wireless Network screen to set up the adapter manually. Figure 5-13: Available Wireless Network 2. The Network Settings screen from the Wireless Network Monitor will appear. If your network has a router or other DHCP server, click the radio button next to Obtain network settings automatically (DHCP). If your network does not have a DHCP server, click the radio button next to Specify network settings. Enter an IP Address, Subnet Mask, Default Gateway, and DNS addresses appropriate for your network. If you are unsure about the Default Gateway and DNS addresses, leave these fields empty. Subnet Mask - The Adapter's Subnet Mask must be the same as your wired network's Subnet Mask. Default Gateway - Enter the IP address of your network's Gateway here. DNS 1 and DNS 2 - Enter the DNS address of your wired Ethernet network here. Click the Next button to continue, or click the Back button to return to the previous screen. Figure 5-14: Network Settings Chapter 5: Using the Wireless Network Monitor Create a New Profile 23 Wireless-G Notebook Adapter with RangeBooster 3. Click the Infrastructure Mode radio button if you want to connect to a wireless router or access point. Click the Ad-Hoc Mode radio button if you want to connect to another wireless device directly without using a wireless router or access point. Enter the SSID for your network. Infrastructure Mode - Use this mode if you want to connect to a wireless router or access point. Ad-Hoc Mode - Use this mode if you want to connect to another wireless device directly without using a wireless router or access point. SSID - This is the wireless network name that must be used for all the devices in your wireless network. It is case- sensitive and should be a unique name to help prevent others from entering your network. Click the Next button to continue, or click the Back button to return to the previous screen. If you chose Ad-Hoc Mode, the Ad-Hoc Mode Settings screen will appear. The channel you choose should match the channel set on the other devices in your wireless network. [. . . ] ALL IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THE WARRANTY PERIOD. ALL OTHER EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF NON-INFRINGEMENT, ARE DISCLAIMED. Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to You. This warranty gives You specific legal rights, and You may also have other rights which vary by jurisdiction. [. . . ]