User manual LINKSYS WMP54GX

[. . . ] ® A Division of Cisco Systems, Inc. 2. 4 GHz Wireless-G 802. 11g PCI Adapter with SRX WIRELESS Model No. User Guide WMP54GX Wireless-G PCI Adapter with SRX Copyright and Trademarks Specifications are subject to change without notice. Other brands and product names are trademarks or registered trademarks of their respective holders. WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. How to Use This User Guide This User Guide has been designed to make understanding networking with the Wireless-G PCI Adapter easier than ever. [. . . ] Figure 5-16: WPA-Personal Needed for Connection WPA2 - Personal Needed for Connection AES is automatically used as the encryption method. Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field. The longer and more complex your Passphrase is, the more secure your network will be. After the Adapter has been configured for the network, the Congratulations screen will appear. Click Connect to Network to connect to your network. Congratulations!The profile is complete. Figure 5-18: Congratulations Screen Chapter 5: Using the Wireless Network Monitor Creating a New Profile 26 Wireless-G PCI Adapter with SRX Setting Up the Adapter with Manual Setup Click Manual Setup on the Available Wireless Network screen to set up the Adapter manually. 1. If your network has a router or other DHCP server, click the radio button next to Obtain network settings automatically (DHCP). If your network does not have a DHCP server, click the radio button next to Specify network settings. Enter an IP Address, Subnet Mask, Default Gateway, and DNS addresses appropriate for your network. If you are unsure about the Default Gateway and DNS addresses, leave these fields empty. IP Address - This IP Address must be unique to your network. Subnet Mask - The Adapter's Subnet Mask must be the same as your wired network's Subnet Mask. Default Gateway - Enter the IP address of your network's Gateway here. DNS 1 and DNS 2 - Enter the DNS address of your wired Ethernet network here. Figure 5-19: Available Wireless Network Screen Click Next to continue, or click Back to return to the Available Wireless Network screen. Figure 5-20: Network Settings Screen Chapter 5: Using the Wireless Network Monitor Creating a New Profile 27 Wireless-G PCI Adapter with SRX 2. Click the Infrastructure Mode radio button if you want to connect to a wireless router or access point. Click the Ad-Hoc Mode radio button if you want to connect to another wireless device directly without using a wireless router or access point. Then, enter the SSID for your network. Infrastructure Mode - Use this mode if you want to connect to a wireless router or access point. Ad-Hoc Mode - Use this mode if you want to connect to another wireless device directly without using a wireless router or access point. SSID - This is the wireless network name that must be used for all the devices in your wireless network. It is case- sensitive and should be a unique name to help prevent others from entering your network. Click Next to continue or Back to return to the previous screen. Figure 5-21: Wireless Mode Screen 3. If you chose Ad-Hoc Mode, the Ad-Hoc Mode Settings screen will appear. The channel you choose should match the channel set on the other devices in your wireless network. If you are unsure about which channel to use, keep the default setting. [. . . ] INDUSTRY CANADA (CANADA) This Class B digital apparatus complies with Canadian ICES-003, RSS210. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. The use of this device in a system operating either partially or completely outdoors may require the user to obtain a license for the system according to the Canadian regulations. EC DECLARATION OF CONFORMITY (EUROPE) Linksys declares that this product conforms to the specifications listed below, following the provisions of the European R&TTE directive 1999/5/EC: EN 301 489-1, 301 489-17 General EMC requirements for Radio equipment. [. . . ]