User manual LINKSYS WAP54GPE

[. . . ] ® A Division of Cisco Systems, Inc. 2. 4 GHz Wireless-G 802. 11g Exterior Access Point WIRELESS Model No. User Guide WAP54GPE Wireless-G Exterior Access Point Copyright and Trademarks Specifications are subject to change without notice. Other brands and product names are trademarks or registered trademarks of their respective holders. WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. How to Use this User Guide The user guide to the Wireless-G Exterior Access Point has been designed to make understanding networking with the Access Point easier than ever. [. . . ] Enter the password that allows read/write access to the Access Point's SNMP information. Enter the password required by the remote host computer that will receive trap messages or notices sent by the Access Point. Chapter 6: Configuring the Wireless-G Exterior Access Point The Administration - Management Tab 30 Wireless-G Exterior Access Point SNMP Trusted Host. You can restrict access to the Access Point's SNMP information by IP address. If this field is left blank, then access is permitted from any IP address. Enter the IP address of the remote host computer that will receive the trap messages. Change these settings as described here and click Save Settings to apply your changes, or click Cancel Changes to cancel your changes. Help information is displayed on the right-hand side of the screen, and click More for additional details. The Administration - Log Tab On this screen you can configure the log settings, as well as options for e-mail alerts of particular events. Log You can have logs that keep track of the Access Point's activities. Email Alert E-Mail Alert. To enable the Access Point to send e-mail alerts in the event of certain attacks (see the "Alert Log" section below), select Enabled. If you are not sure about what address to enter, enter the same e-mail address you entered above for the E-Mail Address for Alert Logs field. Enter the IP address or full mail server name (e. g. , mail. domain. com) of your mail server. s Syslog Notification Figure 6-16: The Administration - Log Screen Syslog is a standard protocol used to capture information about network activity. The Access Point supports this protocol and send its activity logs to an external server. Enter a name for the Access Point. Chapter 6: Configuring the Wireless-G Exterior Access Point The Administration - Log Tab 31 Wireless-G Exterior Access Point Syslog Server IP Address. In addition to the standard event log, the Access Point can send a detailed log to an external Syslog server. The Access Point's Syslog captures all log activities and includes this information about all data transmissions: every connection source and destination IP address, IP server, and number of bytes transferred. The default is Information. Notification Queue Length Log Queue Length. If you want to receive alert logs about any Syn Flooding events, click the checkbox. If you want to receive alert logs about any IP Spoofing events, click the checkbox. If you want to receive alert logs about any Win Nuke events, click the checkbox. If you want to receive alert logs about any Ping of Death attacks, click the checkbox. If you want to receive alert logs about any unauthorized login attempts, click the checkbox. General Log System Error Messages. If you want to log any permission of access policies, click the checkbox. If you want to log any content filtering activities, click the checkbox. [. . . ] INDUSTRY CANADA (CANADA) This Class B digital apparatus complies with Canadian ICES-003, RSS210. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. The use of this device in a system operating either partially or completely outdoors may require the user to obtain a license for the system according to the Canadian regulations. EC DECLARATION OF CONFORMITY (EUROPE) Linksys declares that this product conforms to the specifications listed below, following the provisions of the European R&TTE directive 1999/5/EC: EN 301 489-1, 301 489-17 General EMC requirements for Radio equipment. [. . . ]