User manual LINKSYS WAP54GP

[. . . ] ® A Division of Cisco Systems, Inc. 2. 4 GHz Wireless-G 802. 11g WIRELESS Access Point with Power Over Ethernet User Guide Model No. WAP54GP Wireless-G Access Point with Power Over Ethernet Copyright and Trademarks Specifications are subject to change without notice. Other brands and product names are trademarks or registered trademarks of their respective holders. WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. How to Use this User Guide The user guide to the Wireless-G Access Point with Power Over Ethernet has been designed to make understanding networking with the Access Point easier than ever. [. . . ] On the Language Upgrade screen, enter the location of the language upgrade file in the field provided, or click the Browse button to find the file. Figure 5-20: Administration - Language Upgrade Screen NOTE: Not all languages are available. Check the Linksys website for available language upgrade files. The Administration - Reboot Tab On this screen you can reboot the Access Point. Reboot This feature is useful when you need to remotely reboot the Access Point. Change these settings as described here and click Save Settings to apply your changes, or click Cancel Changes to cancel your changes. Click Help for more information. Figure 5-21: Administration - Reboot Screen Chapter 5: Configuring the Wireless-G Access Point with Power Over Ethernet The Administration - Language Upgrade Tab 30 Wireless-G Access Point with Power Over Ethernet The Administration - Config Management Tab On this screen you can create a backup configuration file or save a configuration file to the Access Point. Config Management Use this screen to upload or download configuration files for the Access Point. To save a backup configuration file on a computer, click the Download AP Configuration File button and follow the on-screen instructions. To upload a configuration file to the Access Point, enter the location of the configuration file in the field provided, or click the Browse button to find the file. Figure 5-22: Administration - Config Management Screen Chapter 5: Configuring the Wireless-G Access Point with Power Over Ethernet The Administration - Config Management Tab 31 Wireless-G Access Point with Power Over Ethernet The Status - Local Network Tab The Local Network screen displays the Access Point's current status information for the local network. Information Hardware Version. The MAC address of the Access Point's Local Area Network (LAN) interface is displayed here. This is the length of time the Access Point has been running. Local Network IP Address. This shows the Access Point's IP Address, as it appears on your local network. Displayed here is the IP address of the Access Point's Default Gateway. Figure 5-23: Status - Local Network Screen Chapter 5: Configuring the Wireless-G Access Point with Power Over Ethernet The Status - Local Network Tab 32 Wireless-G Access Point with Power Over Ethernet The Status - Wireless Tab The Wireless screen displays the Access Point's current status information for the wireless network(s). Wireless Network MAC Address. The MAC Address of the Access Point's wireless interface is displayed here. The Access Point's Channel setting for wireless broadcast is shown here. The wireless security settings for the virtual SSIDs are displayed here. Figure 5-24: Status - Wireless Screen Chapter 5: Configuring the Wireless-G Access Point with Power Over Ethernet The Status - Wireless Tab 33 Wireless-G Access Point with Power Over Ethernet The Status - System Performance Tab The System Performance screen displays the Access Point's status information for its current settings and data transmissions. System Performance Wired Name. This indicates that the statistics are for the wired network, the LAN. This shows the MAC Address of the Access Point's wired interface. This shows the status of the Access Point's connection for the wired network. This shows the number of dropped packets received. Wireless Figure 5-25: Status - System Performance Screen Name. This indicates which wireless network/SSID to which the statistics refer. [. . . ] Questo prodotto è conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il Piano Nazionale di ripartizione delle frequenze in Italia. Se non viene installato all'interno del proprio fondo, l'utilizzo di prodotti Wireless LAN a 2. 4 GHz richiede una "Autorizzazione Generale". Product Usage Restrictions This product is designed for indoor usage only. This product is designed for use with the standard, integral or dedicated (external) antenna(s) that is/are shipped together with the equipment. [. . . ]