User manual LINKSYS SVIEW04

[. . . ] Linksys makes no warranty or representation, expressed, implied, or statutory, with respect to its products or the contents or use of this documentation and all accompanying software, and specifically disclaims its quality, performance, merchantability, or fitness for any particular purpose. Linksys reserves the right to revise or update its products, software, or documentation without obligation to notify any individual or entity. FCC STATEMENT This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Connect the monitor, keyboard, and mouse ports of your PC(s) to one of the 4-Station CPU Switch's CPU ports with a Cabling Kit. Plug the Power Adapter into the 4-Station CPU Switch's power port, then plug the Power Adapter into a power source. Two Stage Installation To control up to 16 PCs through the 4-Station CPU Switch, you will need to connect four additional 4-Station CPU Switches to your first 4-Station CPU Switch. Plug the Power Adapters into the 4-Station CPU Switches' power ports, then plug each Power Adapter into a power source. Three Stage Installation To control the maximum number of PCs under the Three Stage Installation, you will need to connect four additional 4-Station CPU Switches to your first 4Station CPU Switch, and each of those four additional 4-Station CPU Switches will need four 4-Station CPU Switches connected to them, as shown. Using one 4-Station CPU Switch as a Primary unit and the other four 4-Station CPU Switches as Secondary units, use a Cabling Kit to connect the Console ports of the Secondary Units to the CPU ports of the Primary unit. For each Secondary unit, four Tertiary units will be connected by using a Cabling Kit to connect the Console ports of the Tertiary Units to the CPU ports of the Secondary unit. In this way, the 64 CPU ports of the Tertiary units are available through the Primary unit. 1. Using one 4-Station CPU Switch as a Primary unit and the other 4-Station CPU Switches as Secondary units, use a Cabling Kit to connect the Console ports of the Secondary Units to the CPU ports of the Primary unit. In this way, the 16 CPU ports of the Secondary units are available through the Primary unit. Connect the monitor, keyboard, and mouse ports of your PC(s), up to 16, to a CPU port in one the Secondary units with a Cabling Kit. 6 7 ProConnect® Series ProConnect® 4-Station CPU Switch 3. Connect the monitor, keyboard, and mouse ports of your PC(s), up to 64, to a CPU port in one the Tertiary units with a Cabling Kit. Using the ProConnect® 4-Station CPU Switch Hot Plugging The 4-Station CPU Switch supports hot plugging - cables can be connected or unplugged without turning off the switch's power. In order for hot plugging to work properly, however, these procedures must be followed: · Hot Plugging CPU Ports CPU port cables can be unplugged if necessary without powering down the switch. If you reconnect the Cabling Kit (available from your nearest Linksys dealer) to the same port on the switch, the switch will immediately recognize the PC. If you connect it to a different CPU port, the switch will need to redetect and initialize the connection. · Hot Plugging Console Ports The switch supports limited hot plugging of the keyboard, monitor, and mouse. When hot plugging the mouse from the Console's mouse port, however, the following should be considered: 4. Plug the Power Adapters into the 4-Station CPU Switches' power ports, then plug each Power Adapter into a power source. You may unplug the mouse and plug it back in again (to reset the mouse, for example), as long as you use the exact same mouse. If you plug in a different mouse, all of the switches and all the PCs connected to the switches must be shut down and restarted. Therefore, a Port ID of 23 would refer to a computer that is connected to CPU Port 3 of the Second Stage (or Secondary) unit that links back to CPU Port 2 of the First Stage (or Primary) unit. Likewise, a computer attached to a Third Stage (or Tertiary) unit has a three digit Port ID. [. . . ] 2) Unplug the mouse connector from the Console Mouse Port, then plug it back in. Specifications Model Numbers Computer Connections SVIEW04 ver. 2 Direct: 4 Max: 64 CSMA/CD Console:Keyboard - One 6-pin mini-DIN female Mouse - One 6-pin mini-DIN female Video - One HDB-15 female (VGA/SVGA) CPU: One console-type set for each direct connection 5, 10, 20, and 40 seconds VGA, SVGA, and MultiSync with DDC, DDC2, and DDC2B 1920 x 1440 SVGA Four Orange On-line Port Four Green Selected Port Protocol Ports Scan Intervals Monitors Supported Maximum Resolution LEDs The SVPS06 Cabling kit for connecting PCs to the CPU switch is sold separately. If you have any questions about cabling kits, please contact Linksys for assistance. 14 15 ProConnect® Series ProConnect® 4-Station CPU Switch Environmental Warranty Information 8. 8" x 6" x 2" (224mm x 152mm x 52mm) 42. 3 oz. (1. 2 Kg) 9V DC (1. 62w maximum power consumption) FCC Class B, CE Mark Commercial 5ºC to 40ºC (41ºF to 104ºF) -10ºC to 60ºC (14ºF to 140ºF) 10% to 85%, Non-Condensing 5% to 90%, Non-Condensing BE SURE TO HAVE YOUR PROOF OF PURCHASE AND A BARCODE FROM THE PRODUCT'S PACKAGING ON HAND WHEN CALLING. [. . . ]