User manual LINKSYS SPA9000

[. . . ] IP Telephony System Voice User Guide Model No. SPA9000 IP Telephony System Copyright and Trademarks Specifications are subject to change without notice. Other brands and product names are trademarks or registered trademarks of their respective holders. WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. How to Use this Guide The guide to the IP Telephony System has been designed to make understanding networking with the IP Telephony System easier than ever. [. . . ] Enter the port number of the SIP message listening and transmission port. To use the Remote-Party-ID header instead of the From header, select yes. OPT to log the start-line only for all messages except OPTIONS requests/responses. Select 1-line Chapter 6: Using the Web-based Utility The Voice Tab Figure 6-37: Voice - FXS 1 Screen - SIP Settings 59 IP Telephony System excl. NTFY to log the start-line only for all messages except NOTIFY requests/responses. REG to log the start-line only for all messages except REGISTER requests/responses. OPT|NTFY|REG to log the start-line only for all messages except OPTIONS, NOTIFY, and REGISTER requests/responses. OPT to log all SIP messages in full text except OPTIONS requests/responses. NTFY to log all SIP messages in full text except NOTIFY requests/responses. REG to log all SIP messages in full text except REGISTER requests/responses. OPT|NTFY|REG to log all SIP messages in full text except for OPTIONS, NOTIFY, and REGISTER requests/responses. Periodically, the System will log RTP statistics via syslog, depending on debug level. If Lines 1 and 2 use the same SIP Port value and the Restrict Source IP feature is enabled, then the proxy IP address for Lines 1 and 2 is treated as an acceptable IP address for both lines. This controls when the System sends BYE to terminate stale call legs upon completion of call transfers. Multiple delay settings (Referor, Refer Target, Referee, and Refer-To Target) are configured on this screen. For the Referor Bye Delay, enter the appropriate period of time in seconds. For the Refer Target Bye Delay, enter the appropriate period of time in seconds. For the Referee Bye Delay, enter the appropriate period of time in seconds. If this feature is enabled, then the IP Telephony will ignore further 180 SIP responses after receiving the first 183 SIP response for an outbound INVITE. Figure 6-38: Voice - FXS 1 Screen - Subscriber Information Chapter 6: Using the Web-based Utility The Voice Tab 60 IP Telephony System Dial Plan Dial Plan. Refer to "Appendix C: Dial Plan and Auto-Attendant Scripting for Advanced Users" for more details. Figure 6-39: Voice - FXS 1 Screen - Dial Plan Streaming Audio Server (SAS) SAS Enable. [. . . ] LIMITED WARRANTY Linksys warrants to You that, for a period of one year (the "Warranty Period"), your Linksys Product will be substantially free of defects in materials and workmanship under normal use. Your exclusive remedy and Linksys' entire liability under this warranty will be for Linksys at its option to repair or replace the Product or refund Your purchase price less any rebates. If the Product proves defective during the Warranty Period call Linksys Technical Support in order to obtain a Return Authorization Number, if applicable. If You are requested to return the Product, mark the Return Authorization Number clearly on the outside of the package and include a copy of your original proof of purchase. [. . . ]