User manual LINKSYS SPA2100 PRODUCT BROCHURE

[. . . ] 2 In the Static IP Settings section, enter the IP address in the Static IP field, the subnet mask in the NetMask field, and the default gateway IP address in the Gateway field. IMPORTANT: Do not connect the PHONE port to a telephone wall jack. Make sure you only connect a telephone or fax machine to the PHONE port. Otherwise, the Phone Adapter or the telephone wiring in your home or office may be damaged. The Router - Status screen will appear. Click the WAN Setup tab. Static IP Phone Adapter with Router Quick Installation Voice Model SPA2100 Model No. [. . . ] Click the WAN Setup tab. Static IP Phone Adapter with Router Quick Installation Voice Model SPA2100 Model No. No. C Repeat Step B with the PHONE 2 port if you have an additional telephone or fax machine to connect. D Using the Interactive Voice Response Menu 3 In the Optional Settings section, enter the DNS server address(es) in the Primary DNS and optional Secondary DNS fields. 2 Enter the user name in the PPPoE Login Name field, and enter the password in the PPPoE Login Password field. If the Phone Adapter is preconfigured by your ITSP then you , do not need to change any of the default voice settings. Refer to the documentation supplied by your service provider for more information. If you want to change the settings for your Internet phone service, refer to the User Guide, which is available on the Linksys website at www. linksys. com. If you want to configure network settings using the Interactive Voice Response Menu, refer to the next section. This section explains how to use the Interactive Voice Response Menu to configure the Phone Adapter's network settings. You will use the telephone's keypad to enter your commands and select choices, and the Phone Adapter will use voice responses. To access the Interactive Voice Response Menu: The settings you have saved will take effect after you hang up the telephone. Refer to the following table that lists actions, commands, menu choices, and descriptions. To exit the menu, hang up the telephone. Set Network (or Subnet) Mask 121 User Factory Reset 877778 Check Internet Connection Type Check Internet IP Address 100 110 Set Gateway IP Address 131 Confirm Press 1. Cancel - Press * (star). Check Network Mask (or Subnet Mask) Check Gateway IP Address Check MAC Address 120 Set Primary DNS Server IP Address 161 * Follow these instructions to enter the password. · · · · · · · · · A, B, C, a, b, or c -- press 2. All Other Characters -- press 0. Using the Interactive Voice Response Menu While entering a value, such as an IP address, you may exit without entering any changes. After entering a value, such as an IP address, press the # (pound) key to indicate you have finished your selection. For example, to enter the IP address 191. 168. 1. 105 by keypad, press these keys: 191*168*1*105. Press the # (pound) key to indicate that you have finished entering the IP address. Then press 1 to save the IP address or press the * (star) key to cancel your entry and return to the main menu. If the menu is inactive for more than one minute, the Phone Adapter will time out. [. . . ] Press the # (pound) key to indicate that you have finished entering the IP address. Then press 1 to save the IP address or press the * (star) key to cancel your entry and return to the main menu. If the menu is inactive for more than one minute, the Phone Adapter will time out. You will need to re-enter the menu by pressing ****. 130 140 Set the Mode 201 Check Firmware Version Check Primary DNS Server IP Address Check Internet Web Server Port Check Local IP Address Set Internet Connection Type 150 Router/NAT Mode - Press 0. [. . . ]