User manual LINKSYS RE7000

[. . . ] 27 2 Product Overview Front view The indicator LED on the front of the range extender gives you information about power, updating and signal strength. Solid Green Solid Amber • • Fix: Unplug the extender, and move it closer to the router. Make sure your router has an Internet connection and Wi-Fi is turned on. If the router is in order, unplug the extender, move it closer to the router, plug it back in, wait one minute, reconnect to your network. [. . . ] Be sure to choose “As a wired range extender (access point)” when asked how you want to use your range extender. Follow the on-screen instructions to create a network name and password for your access point. Extended networks are identified by "_Ext" added to the end of your main network name(s). Note—If your router’s MAC filtering feature is on you must enter the MAC address of the extender into the list of the router’s allowed addresses. That will allow the extender, and devices connected to extended networks, to connect to the main network. 4GHz and 5GHz radios are identified as Seen By Upstream AP in the Status > WLAN Statistics screen. The MAC address of the extender’s Ethernet port is identified as Extender Mac Address on the Status > Device Info screen. Once the extender can access the router, all devices connected to the extender have access as well. 15 16 How to Access the Settings Interface To change or view range extender settings, first connect to an extended network, e. To change your admin password, click the Management tab of the settings interface and enter a new password under Extender Access. If you have not changed the range extender’s default name, you can also access the settings interface when connected to your main router. Note—XXX are the last 3 digits of your range extender’s MAC address. (You might have to unplug your range extender to see the 17 MAC address label. Plug it back in and make sure the LED light is solid green before accessing the URL. ) If you changed your range extender’s name, you can access the settings interface by entering the new name in a browser. For example: if you named your extender MyExtender, enter http://MyExtender (Windows) or http://MyExtender. You can also enter your range extender’s IP address in a browser. Note—If you are not connected to your extended network you will get a page alerting you that you haven’t connected to the extender. The page will ask whether you are trying to set up a new range extender or access settings on a range extender you already set up. 18 Using Range Extender Settings Click Help on the right side of the screen for additional information on the screen’s options. Changes to settings will not be effective until you click Save at the bottom of the screen. 19 WPS WPS makes it easy to connect your extender to your network, and connect other devices to your network through the extender. [. . . ] 25 Du kan ikke få adgang til din range extender Du skal have forbindelse til dit udvidede netværk for at få adgang til din range-extender. Com/support/RE7000 for prisbelønnet teknisk support døgnet rundt alle ugens dage. Følg anvisningene på skjermen for å lage et nettverksnavn og passord for tilgangspunktet. For dual-band nettverk, sørg for at du kobler til begge bånd, 2, 4 GHz og 5 GHz. [. . . ]