User manual LINKSYS PLWK400

[. . . ] Klik på fanen Security (Sikkerhed) for manuelt at ændre netværksnøglen for hver enhed. 12 2 Linksys PLWK400 Overview Overview Thank you for choosing this Linksys Powerline network adapter kit. These adapters provide easy setup and let you connect wired and wireless network devices to your home network. You need at least two Powerline adapters to create a Powerline network. [. . . ] Connect the network device’s network cable to an available port on the Powerline adapter. The adapter’s Ethernet LED flashes, then stays on when the connection is finished. How to connect your PLW400 After your existing network’s router is connected to a Powerline adapter, you can install your PLW400 elsewhere in your home. TIP You can also set up and configure all of your Linksys Powerline devices using the configuration utility. On the PLW400, press and hold the Wi-Fi Protected Setup button at least one second, until the the Wi-Fi Protected Setup LED flashes. Within two minutes, press the Wi-Fi Protected Setup button on your wireless router. The PLW400 retrieves the security settings from the router and connects to your wireless network. Move your PLW400 to a power outlet near the wireless network device(s) you want to connect. Typically, this area is not covered well by your home’s wireless network router. Flashes, then stays on when the connection to the The Powerline LED rest of the Powerline network is finished. Your home’s wireless network is now available in the area surrounding the PLW400. Connect the wireless network device to the wireless network in the usual manner. For instructions, see your wireless network device’s user documentation. The PLW400’s Wireless LED flashes, then stays on when a wireless network device successfully connects. Using the Utility Using the Utility If you’re having difficulty connecting the adapters using Wi-Fi Protected Setup, or if you’d like to set more advanced options, you can use the configuration utility. Connect a computer’s Ethernet port to the PLW400’s Ethernet port using the provided cable. Insert the setup CD into the computer’s CD or DVD drive, then follow the on-screen instructions. Setting up advanced security NOTE The devices connected to the Powerline adapters will temporarily lose Internet connection during the security setup. On one of the existing Powerline adapters that already have advanced security set up, press and hold the HomePlug Simple Connect button  for at least one second, until the Powerline LED begins flashing slowly. On your PLW400, press and hold the HomePlug Simple Connect button  for at least one second, until the Powerline LED begins flashing slowly. When the LED stops flashing, the network key has been shared with the PLW400. NOTE The devices connected to the adapters will regain Internet access within five minutes. [. . . ] Hvis du har konfigurert avansert sikkerhet for Powerline-nettverket, kontrollerer du følgende: •• Sørg for at alle adapterne på Powerline-nettverket er konfigurert med det samme nettverkspassordet. 3u Fast Ethernet (10/100) Enkel tilkobling, Reset (Tilbakestill) Powerline, Ethernet, Strøm 128-biters AES-koblingskryptering 128 1024/256/64/16/8 QAM, QPSK, BPSK, ROBO Knapper  Wi-Fi Protected Setup, Easy Connect, Reset (Tilbakestill) LED-lamper  Powerline, Ethernet, trådløst, Wi-Fi Protected Setup, strøm Sikkerhetsfunksjoner  128-biters AES-koblingskryptering, WPA2, WPA, WEP Moduleringsoppsett 1024/256/64/16/8 QAM, QPSK, BPSK, ROBO Støtte for nettverksklienter  Opptil 8 Powerline-klientenheter, opptil 32 trådløse klientenheter Operativsystemkrav for verktøy Windows 7/Vista/XP, Mac OS X v10. 5 eller nyere Omgivelser Mål  101, 9 × 71, 9 × 52, 4 mm (4, 0 × 2, 83 × 2, 06 tommer) Vekt Strøm Sertifisering Driftstemperatur Oppbevaringstemperatur Luftfuktighet for drift Luftfuktighet for oppbevaring 116 g (4, 1 oz. ) 100–240 V AC, 50–60 Hz FCC, IC, CE, HomePlug AV 0 til 40 ºC (32 ºF til 104 ºF) -20 til 70 ºC (-4 ºF til 158 ºF) 10 til 85 %, ikke-kondenserende 5 til 90 %, ikke-kondenserende Standard SSID  "CiscoXXXXX" der XXXXX er de siste 5 sifrene i adapterens serienummer Omgivelser Mål Vekt Strøm Sertifiseringer Driftstemperatur Oppbevaringstemperatur Luftfuktighet for drift Luftfuktighet for oppbevaring 113 × 73 × 33 mm (4, 45 × 2, 87 × 1, 3 tommer) 158 g (5, 6 oz. [. . . ]