User manual LINKSYS EG1064

[. . . ] Instant Gigabit Series Instant Gigabit Network Adapter Use this Guide to install the following products: EG1032 (32-bit PCI Card) EG1064 (64-bit PCI Card) User Guide COPYRIGHT & TRADEMARKS Copyright © 2001 Linksys, All Rights Reserved. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks and brand names are the property of their respective proprietors. LIMITED WARRANTY Linksys guarantees that every Instant Gigabit Network Adapter is free from physical defects in material and workmanship under normal use for the lifetime of the card. [. . . ] Make sure the Share-level access control option is selected; do not select User-level access control. The NetWare portion of your Windows setup is complete. Starting Over in Windows 95, 98, or Millennium If you experience installation difficulties, you may need to re-install all of the Windows networking components from scratch. The instructions below explain how to give your PC a clean sweep so that you can retry the Instant Gigabit Network Adapter software installation. At the desktop click on the Start Button, highlight Settings, click on Control Panel. Double-click on the Network Icon. Note: The screen shot above, and the ones on the next three pages, are examples only. They may differ from system to system. 43 44 Instant Gigabit Series Instant Gigabit Network Adapter (EG1032/EG1064) 3. If the Configuration box has a component called Dial-Up Adapter, skip forward to step 5. This includes IPX/SPX. . . Linksys, NetBEUI. . . Linksys, and TCP/IP. . . Linksys. Also remove Client for Microsoft Networks, Client for NetWare Networks, and File and Printer Sharing for Microsoft Networks. 5. For PCs with Dial-Up Networking and/or an AOL adapter, remove any instance of the name Linksys, all IPX/SPX protocols, all NetBEUI, all Clients, and File and Printer Sharing for Microsoft Networks. Do not remove Dial-Up Adapter, AOL Adapter, TCP/IP-Compatible Protocol-AOL Adapter or TCP/IP-Compatible Protocol-Dial-Up Adapter. In some cases, removing one of these components may in turn automatically remove other components as well. When you have completed the removal of all unnecessary components, click OK. Click on the Device Manager Tab. 45 46 Instant Gigabit Series Instant Gigabit Network Adapter (EG1032/EG1064) 8. Scroll down to the Network Adapters listing and expand it by clicking on the plus [+] sign. Starting Over in Windows 2000 1. Click the Start button, choose Settings, choose Control Panel, then doubleclick the System icon. The System Properties window will open. (If Other Devices is not listed, proceed to the next step. ) 11. Click the Close button, shut down Windows, and restart your computer. 12. After your computer has restarted, follow the setup instructions for Windows 95, 98, or Millennium. 3. The EG1032 or EG1064 Instant Gigabit Network Adapter listing should appear. 47 48 Instant Gigabit Series Instant Gigabit Network Adapter (EG1032/EG1064) 5. Right-click on Linksys EG1032/EG1064 Instant Gigabit Network Adapter again. The Network Adapters category should be removed from the Device Manager listing. When asked if you want to Disable the device, click Yes. 49 50 Instant Gigabit Series Instant Gigabit Network Adapter (EG1032/EG1064) Manually Installing the Network Components in Windows 95, 98, and Millennium There may be times when you will need to manually install missing Windows networking components. · Client for Microsoft Networks · Linksys EG1032/EG1064 Instant GigabitTM Network Adapter · IPX/SPX-compatible Protocol · NetBEUI · TCP/IP IPX/SPX-compatible Protocol Click the Add button. [. . . ] This means that the application program that uses UDP must be able to make sure that the entire message has arrived and is in the right order. 66 65 Instant Gigabit Series Instant Gigabit Network Adapter (EG1032/EG1064) Network applications that want to save processing time because they have very small data units to exchange (and therefore very little message reassembling to do) may prefer UDP to TCP. Upgrade - To replace existing software or firmware with a newer version. In a communications session, upload means transmit, download means receive. URL (Uniform Resource Locator) - The address that defines the route to a file on the Web or any other Internet facility. [. . . ]