User manual LINKSYS EFG120

[. . . ] ® A Division of Cisco Systems, Inc. EtherFast® Network Attached Storage 120GB with PrintServer WIRED User Guide Model No. EFG120 EtherFast Network Attached Storage (120GB with PrintServer) Copyright and Trademarks Specifications are subject to change without notice. Other brands and product names are trademarks or registered trademarks of their respective holders. WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. How to Use this Guide Your guide to the Network Attached Storage has been designed to make understanding networking with the Network Attached Storage easier than ever. [. . . ] Click the Groups button to open the User Membership screen, which allows you to view and/or modify the group that the selected user is in. (Refer to the "User Membership" section on the following page. ) Delete. When deleting a user, you have the option of deleting the group and share with the same name as the user (if they exist). Properties Change the properties for the selected user, or use these settings to add a new user. The user's name must be composed of alphanumeric characters and must not exceed 15 characters in length. Select Create matching Group and Share (Private Folder) to create a group and a share with the same name as the user when you are adding a new user. Then select which disk is used for the private folder, Disk 1 or Disk 2. (When you are modifying the properties of an existing user, you cannot use the Create matching group and share (Private Folder) option; however, you can change the location of the private folder, if it already exists. ) Enable Disk Quota of. If you want to set a disk usage limit for the user, select Enable Disk Quota of. Enter the maximum number of megabytes the user is allowed to use. Figure 5-11: Administration Tab - Users Chapter 5: Configuring the Network Attached Storage The Administration Tab - Users 28 EtherFast Network Attached Storage (120GB with PrintServer) If you wish to add a new user, click the Save as New User button after entering all the new settings. For more information about this screen, click the Help button. User Membership On the User Membership screen, the Member of column lists the group memberships for the selected user, while the Other Groups column lists all of the other groups. In the right-hand column, select the group or groups whose membership you want to add, and then click the << button. Multiple groups can be selected by holding down the CTRL key while you make the selections. In the left-hand column, select the group or groups whose membership you want to revoke, and then click the >> button. Multiple groups can be selected by holding down the CTRL key while you make the selections. Figure 5-12: User Membership Screen The Administration Tab - Status The Status screen allows you to check the Network Attached Storage's details and status. System Information System GigaDrive Name. This is the Network Attached Storage's current name, which will be used to identify it in Network Neighborhood or My Network Places. This indicates the Network Attached Storage's current status, which will usually say, "Ready". If the Network Attached Storage is not available, then a message will say why it is not available (for example, it may say "Scandisk in Progress" if the Network Attached Storage is busy undergoing the scandisk process). Click the Shutdown Now button to immediately shut down the Network Attached Storage. Any new settings you may have entered will not be saved. Chapter 5: Configuring the Network Attached Storage The Administration Tab - Status Figure 5-13: Administration Tab - Status 29 EtherFast Network Attached Storage (120GB with PrintServer) Click the Restart Now button to restart (reboot) the Network Attached Storage. The Network Attached Storage will immediately restart and won't be available again until after the restart is complete. The log file is a record of the Network Attached Storage's activities, so it may help with management and troubleshooting. [. . . ] Your exclusive remedy and Linksys' entire liability under this warranty will be for Linksys at its option to repair or replace the Product or refund Your purchase price less any rebates. If the Product proves defective during the Warranty Period call Linksys Technical Support in order to obtain a Return Authorization Number, if applicable. If You are requested to return the Product, mark the Return Authorization Number clearly on the outside of the package and include a copy of your original proof of purchase. Customers located outside of the United States of America and Canada are responsible for all shipping and handling charges. [. . . ]