User manual LINKSYS E3000

[. . . ] 63 High Performance Wireless-N Router ii Linksys E3000 Chapter 1: Product Overview Wi-Fi Protected Setup Button  If you have client devices, such as wireless adapters, that support Wi-Fi Protected Setup, then you can use the Wi-Fi Protected Setup button to automatically configure wireless security for your wireless network(s). to use Wi-Fi Protected Setup , refer to Wi-Fi Protected Setup , page 21. Wireless  (Blue)  The Wireless LED lights up when the wireless feature is enabled. Internet  (Green/Blue)  The Internet LED lights up when there is a connection made through the Internet port. [. . . ] No Acknowledgement  If you want to disable the Router’s Acknowledgement feature, so the Router will not re-send data if an error occurs, select Enabled. add a New Application Enter a Name  Enter a name for this application. Port Range  Enter the port range that the application will be using. For example, if you want to allocate bandwidth for FTP, you can enter 21-21. If you need services for an application that uses from 1000 to 1250, you enter 10001250 as your settings. You can have up to three ranges to define for this bandwidth allocation. Check your application’s documentation for details on the service ports used. Internet Access Priority In this section, you can set the bandwidth priority for a variety of applications and devices. When you set priority, do not set all applications to High, because this will defeat the purpose of allocating the available bandwidth. Depending on the application, a few attempts may be needed to set the appropriate bandwidth priority. Enabled/Disabled  To use the QoS policies you set, select Enabled. high Performance Wireless-N Router 36 Linksys E3000 Online Games Chapter 3: Advanced Configuration MAC Address Online Games MAC Address Online Games Games  Select the appropriate game. If you select Add a New Game, follow the instructions in the Add a New Game section. Add a New Game Enter a Name  Enter any name to indicate the name of the entry. You can have up to three ranges to define for this bandwidth allocation. Check your application’s documentation for details on the service ports used. Voice Device Voice Device Enter a Name  Enter a name for your voice device. High Performance Wireless-N Router 37 Linksys E3000 Summary This lists the QoS entries you have created for your applications and devices. Information  This column displays the port range or MAC address entered for your entry. If a pre-configured application or game was selected, there will be no valid entry shown in this section. Click Save Settings to apply your changes, or click Cancel Changes to clear your changes. Chapter 3: Advanced Configuration Local Management Access Access via  HTTP (HyperText Transport Protocol) is the communications protocol used to connect to servers on the World Wide Web. [. . . ] The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived from this software without prior written permission. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their names without prior written permission of the OpenSSL Project. high Performance Wireless-N Router Appendix F: Software End User License Agreement 6. Redistributions of any form whatsoever must retain the following acknowledgment: “This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www. [. . . ]