User manual LINKSYS E2100L

[. . . ] 61 Advanced Wireless-N Router iii Linksys E2100L Chapter 1: Product Overview Wireless  (Blue)  The Wireless LED lights up when the wireless feature is enabled. It flashes when the Router sends or receives data over the wireless network. Internet  (Blue)  The Internet LED lights up when there is a connection made through the Internet port. Power  (Blue)  The Power LED lights up when the Router is powered on. [. . . ] Access via Wireless  If you are using the Router in a public domain where you are giving wireless access to your guests, you can disable wireless access to the Router’s browser-based utility. You will only be able to access the utility via a wired connection if you disable the setting. Keep the default, Enabled, to allow wireless access to the utility, or select Disabled to block wireless access to the utility. Summary This lists the QoS entries you have created for your applications and devices. priority  This column displays the bandwidth priority of High , Medium , Normal , or Low. Name  This column displays the application, game, device, or port name. Information  This column displays the port range or MAC address entered for your entry. If a pre-configured application or game was selected, there will be no valid entry shown in this section. Advanced Wireless-N Router 36 Linksys E2100L Remote Access Remote Management  To permit remote access of the Router from the Internet (outside the local network), select Enabled. Access via  HTTP (HyperText Transport Protocol) is the communications protocol used to connect to servers on the World Wide Web. Remote Upgrade  If you want to be able to upgrade the Router from the Internet (outside the local network), select Enabled. Allowed Remote IP Address  If you want to be able to access the Router from any external IP address, select Any IP Address. If you want to specify an external IP address or range of IP addresses, then select the second option and complete the fields provided. Remote Management Port  Enter the port number that will be open to outside access. (When you remotely access the Router, you will need to enter the Router’s password. ) NOTE: When you are in a remote location and wish to manage the Router, enter http://xxx. Enter the Router’s specific Internet IP address in place of xxx. Chapter 3: Advanced Configuration Restore Configurations  To restore the Router’s configuration settings, click this option and follow the onscreen instructions. (You must have previously backed up the Router’s configuration settings. ) Click Save Settings to apply your changes, or click Cancel Changes to clear your changes. Administration > Log The Router can keep logs of all traffic for your Internet connection. administration > Log Log Log  To disable the Log function , select Disabled. [. . . ] Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. All advertising materials mentioning features or use of this software must display the following acknowledgment: “This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived from this software without prior written permission. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their names without prior written permission of the OpenSSL Project. [. . . ]