User manual LINKSYS AE2500

[. . . ] Online Resources Website addresses in this document are listed without http:// in front of the address because most current web browsers do not require it. If you use an older web browser, you may have to add http:// in front of the web address. Com/security Copyright and Trademarks Linksys, Cisco and the Cisco Logo are registered trademarks or trademarks of Cisco Systems, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. [. . . ] UPnP Universal Plug and Play (UPnP) allows the appropriate Windows operating system to automatically configure the Router for various Internet applications, such as gaming and videoconferencing. UPnP  If you want to use UPnP, keep the default setting of Enabled. Allow Users to Configure  Keep the default setting of Enabled, if you want to be able to make manual changes to the Router while using the UPnP feature. <Type> Log  The Incoming Log displays a temporary log of the source IP addresses and destination port numbers for the incoming Internet traffic. The Outgoing Log displays a temporary log of the local IP addresses, destination URLs/IP addresses and service/ port numbers for the outgoing Internet traffic. The Security log displays the login information for the web-based utility. Click Save the Log to save this information to a file on your PC's hard drive. diagnostics > Ping Traceroute Test Traceroute checks the performance of a connection. IP or URL Address  Enter the address of the PC whose connection you wish to test. Click Save Settings to apply your changes or click Cancel Changes to cancel your changes. Administration > Diagnostics The diagnostic tests (Ping and Traceroute) allow you to check the connections of your network devices, including connection to the Internet. Status > Router The Router screen displays information about the Router and its current settings. Wireless-N Broadband Router with Storage Link 29 Chapter 3 Advanced Configuration DHCP Client Table The DHCP Client Table lists computers and other devices that have been assigned IP addresses by the Router. The list can be sorted by IP Address, MAC Address, Interface and Client Name. To exit this screen and return to the Local Network screen, click Close. Status > Local Network Local Network Local MAC Address  The MAC address of the Router’s local, wired interface is displayed. Router IP Address  The Router’s IP address, as it appears on your local network, is displayed. Start IP Address  For the range of IP addresses used by devices on your local network, the starting IP address is displayed. End IP Address  For the range of IP addresses used by devices on your local network, the ending IP address is displayed. DHCP Clients Table  Click this button to view a list of computers or other devices that are using the Router as a DHCP server. Wireless Network MAC Address  The MAC address of the Router’s local, wireless interface is displayed. Network Name (SSID)  The name of the wireless network, which is also called the SSID, is displayed. [. . . ] This product includes cryptographic software written by Eric Young (eay@cryptsoft. In addition, if this Cisco product contains open source software licensed under the OpenSSL licence then the licence terms below in this Schedule 3-C will apply to that open source software. The licence terms below in this Schedule 3-C are from the public web site at http://www. Wireless-N Broadband Router with Storage Link 62 Appendix F Software End User Licence Agreement This product includes cryptographic software written by Eric Young (eay@cryptsoft. [. . . ]