User manual LIEBHERR B2756-21

[. . . ] 2 2 2 3 3 3 3 3 3 4 4 4 4 4 4 5 6 6 6 6 7 7 7 7 7 7 8 8 8 8 8 9 9 (1) Transport grips at back (2) Operating and control elements (3) Drawer for herbs and berries (4) Type plate (5) Drawers Fig. 2 Range of appliance use The appliance is suitable solely for cooling food in a domestic environment or similar. This includes use in, for example - in staff kitchenettes, bed and breakfast establishments, - by guests in country homes, hotels, motels and other forms of accommodation, - in catering and similar services in the wholesale trade Use the appliance solely as is customary within a domestic environment. The appliance is not suitable for storing and cooling medicines, blood plasma, laboratory preparations or similar substances and products covered by the 2007/47/EC Medical Devices Directive. [. . . ] 5 (8) in a forward direction using a screwdriver and remove them downwards at an angle. 5 (7) to the side where the bearing pin is located: insert it at the back and engage it at the front. 5 (8) at the opposite side: insert it at the back and engage it at the front. 3 Changing over the door hinges You can change over the door hinges if necessary. Ensure that the following tools are to hand: q Torx 25 q Torx 15 q Screwdriver q Accompanying open-end spanner q Second person for fitting work, if needed Fig. * u If necessary, tip the appliance back a little with the assistance of a second person for removal of the bearing pin. 4 (5), transfer it to the opposite hole in the turn hinge and screw it down again. 4 (4) onto the new hinge side tightly (4 Nm) or retighten with the aid of a cordless screwdriver if necessary. U When fitting the pressure plates, pay attention that they engage properly. U Slightly tip the appliance backwards again and reinsert the bearing pin Fig. 7 5 Putting into operation CAUTION Risk of injury if the door tips!U The safety lock (1) has to engage with the turn hinge at the side so that the bearing pin and therefore the door are secured. 8 (2) to the height of the row of units, a suitable stack cabinet Fig. Depth 580 mm), the appliance can be installed directly next to the kitchen unit Fig. The appliance door projects relative to the front of the kitchen unit by 34 mm at the side and by 50 mm in the middle of the appliance. Important for the ventilation: - At the back of the stack cabinet there has to be a ventilation duct of at least 50 mm depth throughout the width of the stack cabinet. - The larger the ventilation space, the more energy-saving the appliance is in operation. 8 (4), the distance between appliance and wall has to be at least 40 mm. This corresponds to the projection of the handle when the door is open. U If necessary, align the door to the appliance housing by way of the two oblong holes in the turn hinge Fig. If the bearing parts are not screwed into place firmly enough, the door may drop out. What is more, the door may not close and therefore the appliance may fail to cool properly. [. . . ] It is briefly a little louder when the refrigeration unit (the motor) switches on. †’ The refrigeration increases automatically when fresh food has just been placed in the appliance or the door has been left open for a while. The fan runs for a long time → With the "hydro" setting, the fan has to run longer for functional reasons. As a result, adjoining units or objects are set into vibration by the running refrigeration unit. [. . . ]