User manual LG 22MN43D

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LG 22MN43D. We hope that this LG 22MN43D user guide will be useful to you.


LG 22MN43D : Download the complete user guide (8505 Ko)

You may also download the following manuals related to this product:

   LG 22MN43D (8430 ko)

Manual abstract: user guide LG 22MN43D

Detailed instructions for use are in the User's Guide.

[. . . ] Therefore, NEVER: Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc. Place the display in a built-in enclosure unless proper ventilation is provided. Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently. Do not press the LCD screen with your finger for a long time as this may cause some afterimages. [. . . ] Change your hold on the product as it follows and turn the Stand Base in the arrow direction until you hear a "click. " 5. Pull out the Stand to remove. A5 Connecting the Display To remove the Stand Base: 1. Base are successfully separated. A6 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range: -5˚~20˚ Swivel : 358˚(The feature is not available for all countries) 20 L1753H / 22MN43D / L1953H / L1953HR Height Range : maximum 3. 94 inch (100 mm) 100 mm Warning: When adjusting height of the monitor, do not put your fingers between monitor and stand bottom. You may hurt your fingers. Ergonomic It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees. A7 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display L1753HM / L1953HM Height Range : maximum 2. 36 inch (60 mm) 60 mm Note: When you use speakers, be sure to set up the stop cover first as shown. Then you use height function, the speakers will not touch the base cover. stop cover Stop cover is only for speaker models - L1753HM, L1953HM Warning: When adjusting height of the monitor, do not put your fingers between monitor and stand bottom. You may hurt your fingers. A8 Connecting the Display Using the Computer 1. Place the monitor in a convenient, well-ventilated location near your computer. Connect the power cord into a proper power outlet that is easily accessible and close to the display. 1 Analog signal Digital signal NOTE This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown. Varies according to model. Wall-outlet type 2 1 PC-outlet type PC PC DVI-D(This feature is not available in all countries. ) MAC Mac adapter For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. 4. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. (Only Analog Mode) NOTE ‘ Self Image Setting Function’?The applied screen will appear on the left side, whereas the non-applied screen will appear on the right side. Touch the SET button to use the adjusted screen. Screen when applied Screen when not applied Main menu Sub menu Description MOVIE This feature lets you easily select the best desired TEXT image condition optimized to the environment (ambient illumination, image types etc). MOVIE: For animation images in videos or movies TEXT: For text images (Word processing etc. ) USER User You can manually adjust brightness, ACE or RCM. You can save or restore the adjusted value even when using a different envir . . . . . . RCM(Real Color Management): Selects the color mode. 0 1 2 To adjust the USER sub-menu function, Press the SET Button USER BRIGHTNESS ACE 1 RCM 2 3 Not applied Green enhance Flesh tone Color Enhance SAVE Select the SAVE sub-menu using the SET button and save the YES value using the buttons. NORMAL This is under normal operating conditions. A18 Troubleshooting Check the following before calling for service. No image appears G Is the power cord of the • Check and see if the power cord is connected properly to the power outlet. • Press the Power button. G Is the power on and the • Adjust the brightness and the contrast. • If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. • Try to turn on the PC. G Do you see an "OUT OF • This message appears when the signal from the PC (video card) is out of horizontal or vertical RANGE" message on frequency range of the display. 'Specifications' section of this manual and configure your display again. • This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again. Do you see a "OSD LOCKED" message on the screen? G Do you see “OSD LOCKED” when you push MENU button? [. . . ] • Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www. lge. com. • Make sure to check if the video card supports Plug&Play function. G Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? A21 Specifications Display L1753H / 22MN43D 17 inches (43. 2 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 17 inches viewable 0. 264 mm pixel pitch Horizontal Freq. Input Form Analog : 30 - 83 kHz (Automatic) Digital : 30 - 71 kHz (Automatic) 56 - 75 Hz (Automatic) Separate TTL, Positive/Negative SOG (Sync On Green) Digital 15 pin D-Sub Connector DVI - D connector (Digital) RGB Analog (0. 7 Vp-p/ 75 ohm), Digital Analog : VESA 1280 x 1024 @75 Hz Digital : VESA 1280 x 1024 @60 Hz VESA 1280 x 1024 @60 Hz : 30 W (Typ. ) ≤ 1W ≤ 1W With Stand Without Stand Sync Input Video Input Signal Input Input Form Resolution Max Recommend Plug&Play Power Consumption Dimensions &Weight DDC 2B 0n Mode Sleep Mode Off Mode 36. 45 cm / 14. 35 inches Width 36. 45 cm / 14. 35 inches Height 35. 18 cm / 13. 85 inches (Min) 30. 53 cm / 12. 02 inches 45. 18 cm / 17. 79 inches (Max) Depth 20. 74 cm / 8. 17 inches 5. 8 cm / 2. 28 inches Net 3. 68(+0. 085) kg (8. 17 lbs) -5˚~20˚ Tilt Range Power Input Environmental Conditions Tilt AC 100-240V~ 50/60Hz 0. 8A Operating Conditions Temperature 10˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20˚C to 60 ˚C Humidity 5 % to 90 % non-Condensing Attached( ), Detached ( O ) Wall-outlet type or PC-outlet type Stand Base Power cord NOTE Information in this document is subject to change without notice. A22 Specifications Display 17 inches (43. 2 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 17 inches viewable 0. 264 mm pixel pitch Horizontal Freq. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE LG 22MN43D




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LG 22MN43D will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.