User manual LEXMARK X646EF

[. . . ] X646ef Menus and Messages Guide February 2006 www. lexmark. com Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc. , registered in the United States and/or other countries. 740 West New Circle Road Lexington, Kentucky 40550 Edition: February 2006 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. , PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. [. . . ] See Duplex Bind on page 77 for more information about long edge. Landscape Settings 70 Using the MFP menus Menu item Original Size Purpose Provides a list of possible scanner sizes to select from to specify the size of the original document to be scanned. Values and descriptions Letter (8. 5 x 11 in. )* Legal (8. 5 x 14 in. ) Executive (7. 25 x 10. 5 in. ) Folio (8. 5 x 13 in. ) Statement (5. 5x 8. 5 in. ) A4 (210 x 297 mm)* A5 (148 x 210 mm) JIS-B5 (182 x 257 mm) Auto Size Sense Mixed Sizes Off* Long edge (* Denotes a country/region-specific factory default value. ) Duplex Sets duplex printing (two-sided printing) either on or off for FTP jobs. This menu item appears if an optional duplex unit is installed or if the MFP model has an internal duplex unit. The FTP job is not set for duplex printing. The binding is along the long edge of the page (left edge for portrait orientation and top edge for landscape orientation). The binding is along the short edge of the page (top edge for portrait orientation and left edge for landscape orientation). A 5 setting gives a smaller file size, but the quality of the image is lessened. A 90 setting gives the best quality of the image, but the file size is very large. A 5 setting gives a smaller file size, but the quality of the image is lessened. A 90 setting gives the best quality of the image, but the file size is very large. Clear the check box to turn it off. Short edge Photo JPEG Quality Sets the quality of a JPEG photo image in relation to file size and the quality of the image. Sets the quality of a JPEG text or text/photo image in relation to file size and the quality of the image. This menu item applies to Text, Text/Photo, and all scan functions. 5­90 (50%*) JPEG Quality 5­90 (75%*) Use multi-page TIFF Provides a choice between Yes* single-page TIFF files and multiplepage TIFF files. For a multiple-page scan to FTP job, either one TIFF file No is created containing all the pages, or multiple TIFF files are created with one file for each page of the job. Print Always* Print Never Print on Error Transmission Log The FTP transmission log always prints. The FTP transmission log only prints when an error occurs. Settings 71 Using the MFP menus Menu item Log Paper Source Purpose To select the print media source to supply print media for the MFP to print a log of all sent and received FTPs. Note: This menu item applies to all scan functions. Values and descriptions Tray 1* MP Feeder Tray 2 (if an optional drawer is installed) A list of available output bins is shown as values, such as Bin 1, Bin 2, and so on based on the number of bins installed. 1 bit* 8 bit text entry The default value is the following word: image Note: There is a 53-character limit for the base file name. The following characters or symbols are invalid: * ­ asterisk : ­ colon ?­ question mark < ­ less than symbol > ­ greater than symbol | ­ vertical bar A time stamp is added to the end of the base file name. Tray 2, which is an optional drawer, is the specified print media source. Log Output Bin Specifies the output bin that accepts the printed FTP log. The menu item only appears when one optional output bin is installed. FTP Bit Depth Enables the Text/Photo mode to have smaller file sizes by using 1 bit images when Color is set to Off. Base file name Custom Job scanning Allows for scanning of custom FTP jobs. If the Content menu item is reset from the default setting, then the default for Contrast is reset, also. On Off* Allow Save as shortcut Background Removal Contrast Yes* No -4 to +4 (0*) When it is set to No, the Save as Shortcut button does not appear on the FTP Destination screen. The default is 0 for items other than text. 0­5 Settings 72 Using the MFP menus Menu item Shadow Detail Purpose Adjusts the amount of shadow detail visible on a copy. [. . . ] Touch Scan from Automatic Document Feeder if the page jam recovery is active. Scanning resumes from the ADF immediately after the last successfully scanned page. Scanning resumes from the flatbed immediately after the last successfully scanned page. Touch Finish job without further scanning if page jam recovery is active. [. . . ]