User manual LEXMARK X215

[. . . ] X215 MFP User's Guide April 2003 www. lexmark. com Edition: April 2003 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. , PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. [. . . ] The selected number appears on the display. Scale If you copy original documents from the document glass, you can reduce or enlarge the size of a copied image from 25% to 400%. If you copy original documents from the ADF, you can reduce or enlarge the size of a copied image from 25% to 100%. To scale a document to a pre-defined copy size: 1 Press Scale. The default setting appears on the bottom line of the display. 2 Press a scroll button ( or ) repeatedly until the copy size you want is displayed, and then press Select. 2 Press a scroll button ( or ) until CUSTOM:25-400% (or CUSTOM:25-100%) appears on the bottom line of the display, and then press Select. 3 Enter the size you want using the numeric keypad, and then press Select. The selected number appears on the display. Customizing settings 46 Advanced Using the advanced option, you can copy images onto a page in a variety of layouts. The advanced settings available when a document is loaded in the ADF include: · · Off: Turns off the advanced copy features. Collation: Controls the sequence in which multiple page documents are printed (for example, if you copied a 5 page document without collation, the copier would output 5 pages of the first page, 5 pages of the second page, and so on. If you selected collation, the copier would output pages 1 through 5 for the first copy, pages 1 through 5 for the second copy, and so on. ) 2-UP: Prints two copied documents on a single page. 4-UP: Prints four copied documents on a single page. 1 2 · · 3 4 The Advanced settings available when a document is loaded on the scanner bed include: · · · Off: Turns off the advanced copy features. Auto Fit: Automatically reduces or enlarges the original image so that the resulting copy will fit on the paper that is currently loaded in the machine. After copying the first document, you are prompted to place a second document on the scanner bed. This feature is very similar to the 2-Up option which is available when using the ADF. However, when using the scanner bed, the 2-Side feature is especially useful when copying both sides of an original document. Note: Autofit and 2-side can be selected only when the paper size is letter, legal, or A4. To select the advanced setting you want to use: 1 Press Advanced repeatedly. 2 When the setting you want appears, click Select. Customizing settings 47 Customizing default settings The default settings for the basic copy options (darkness, content, number, scale) are set using the operator panel menu. When you copy a document, these default settings are used unless you change them using the operator panel buttons (see page 45). To customize the default settings: Press Menu. 3 Press a scroll button ( or ) until COPY MENU appears on the top line of the display, and then press Select. 4 Press a scroll button to scroll through the copy options. 6 Change the setting by pressing a scroll button or enter a value using the numeric keypad, and then press Select. 7 Repeat steps 4 through 6, as necessary. Note: While setting copy options, pressing Stop/Clear cancels the changed setting and restores the default status. 8 To return to the Ready prompt, press Stop/Clear. Setting the Timeout option If you change your copy settings using the operator panel buttons for a specific job, your machine will eventually restore your default settings. To set the length of time the machine waits before restoring default settings: 1 Press Menu. 2 Press a scroll button ( or ) until MACHINE SETUP appears on the top line of the display, and then press Select. 3 Press a scroll button until TIMEOUT appears on the bottom line of the display, and then press Select. 4 Press a scroll button until the status you want (15, 30, 60, or 180 seconds) appears on the display, and then press Select. 5 To return to the Ready prompt, press Stop/Clear. Customizing default settings 48 Creating two-sided copies You can create two-sided copies by using the manual bypass to feed previously copied output pages back into your machine. Using the ADF 1 Copy the first side of your original document normally. Note: Make sure to maintain a consistent orientation when loading documents into the ADF. If you do not, the reverse side of the document copy could print upside down. 2 Reload your original document into the ADF with the opposite side facing up. 3 Load the previously copied output page into the manual bypass with the previously copied side facedown, feeding the top edge of the page into the machine first. 4 Press Start. Using the scanning bed 1 Place your original document on the scanning bed facedown, with the top left corner of the page aligned with the arrow on the corner of the document glass. 2 Press Start. 3 Place the opposite side of your document on the scanning bed, with the top left corner of the page aligned with the arrow on the corner of the document glass. 4 Load the previously copied output page into the manual bypass with the previously copied side facedown, feeding the top edge of the page into the machine first. 5 Press Start. Creating two-sided copies 49 6 Scanning Scanning a document or image Scanning with this machine requires the use of TWAIN-compliant software, such as Scansoft PaperPort or Adobe Photoshop. [. . . ] You will also be advised of your right to file a complaint with the FCC. If trouble is experienced with this equipment, for repair or warranty information, please contact Lexmark International, Inc. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. For repair and warranty information, please contact Lexmark International, Inc. [. . . ]