User manual LEXMARK X204N

[. . . ] Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This product uses a printing process that heats the print media, and the heat may cause the media to release emissions. You must understand the section in your operating instructions that discusses the guidelines for selecting print media to avoid the possibility of harmful emissions. To reduce the risk of injury from a hot component, allow the surface to cool before touching. [. . . ] Specifies the number of times the printer tries to send the fax to a specified number Note: 5 is the factory default setting. Specifies the number of minutes between redials Note: 3 minutes is the factory default setting. Enables switchboard blind dialing without a dial tone Note: No is the factory default setting. Enables Error Correction Mode for fax jobs Note: Yes is the factory default setting. Lets you send faxes by scanning at the printer Note: On is the factory default setting. Understanding printer menus 98 Menu item Driver to fax Yes No Dial Mode Tone Pulse Max Speed 2400 4800 9600 14400 33600 Background Removal -4 to +4 Contrast Best for content 0­5 Shadow Detail -4 to +4 Scan edge to edge On Off Sharpness 1­5 Description Allows driver to fax jobs to be sent by the printer Note: Yes is the factory default setting. Specifies the dialing sound, either as a tone or a pulse Note: Tone is the factory default setting. Specifies the maximum speed in baud at which faxes are sent Note: 33600 baud is the factory default setting. Adjusts the amount of background visible on a copy Note: 0 is the factory default setting. Specifies the contrast of the output Note: "Best for content" is the factory default setting. Adjusts the amount of shadow detail visible on a copy Note: 0 is the factory default setting. Specifies if the original document is scanned edge-to-edge Note: Off is the factory default setting. Adjusts the sharpness of a fax Note: 3 is the factory default setting. Fax Receive Settings Menu item Enable Fax Receive On Off Rings to Answer 1­25 Auto Answer Yes No Manual Answer Code 1­9 Description Allows fax jobs to be received by the printer Note: On is the factory default setting. Specifies the number of rings before answering an incoming fax job Note: 3 is the factory default setting. Allows the printer to answer an incoming fax job Note: Yes is the factory default setting. Lets you enter a code on the telephone number pad to begin receiving a fax Notes: · This menu item is used when the printer shares a line with a telephone. · 9 is the factory default setting. Understanding printer menus 99 Menu item Auto Reduction On Off Fax Footer On Off Max Speed 2400 4800 9600 14400 33600 Block No Name Fax On Off Description Scales an incoming fax job so it fits the size of the paper loaded in the designated fax source Note: On is the factory default setting. Prints the transmission information at the bottom of each page from a received fax Note: Off is the factory default setting. Specifies the maximum speed in baud at which faxes are received Note: 33600 (baud) is the factory default setting. Enables blocking of incoming faxes sent from devices with no station ID specified Note: Off is the factory default setting. Fax Log Settings Menu item Transmission Log Print log Do not print log Print only for error Receive Error Log Print Never Print on Error Auto Print Logs On Off Logs Display Remote Station Name Dialed Number Enable Job Log On Off Enable Call Log On Off Description Enables printing of a transmission log after each fax job Note: Print log is the factory default setting. Enables printing of a receive error log following a receive error Note: Print Never is the factory default setting. Enables automatic printing of fax logs Note: On is the factory default setting. Specifies whether printed logs display the dialed number or the station name Note: "Remote Station Name" is the factory default setting. Enables access to the Fax Job log Note: On is the factory default setting. Enables access to the Fax Call log Note: On is the factory default setting. Understanding printer menus 100 Speaker Settings Menu item Speaker Mode Always Off On until Connected Always On Description Notes: · Always Off turns the speaker off. · "On until Connected" is the factory default setting. [. . . ] Products equipped with 2. 4GHz Wireless LAN option are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment. Compliance is indicated by the CE marking. Operation is allowed in all EU and EFTA countries, but is restricted to indoor use only. The manufacturer of this product is: Lexmark International, Inc. , 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft. , 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative. Cesky Dansk Spolecnost Lexmark International, Inc. [. . . ]