User manual LEXMARK T634 Reference Guide

[. . . ] Technical Reference May 2003 www. lexmark. com Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc. , registered in the United States and/or other countries. 740 West New Circle Road Lexington, Kentucky 40550 Edition: May 2003 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. , PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. [. . . ] Table 4-10: Literal Names Supported Supported Not Supported Literal Names Printer Model T630, T632, T634 Literal Name monarcenvelope com10envelope dlenvelope c5envelope b5envelope Compatible Literal Name 3. 875x7. 5envelope 4. 125x9. 5envelope 110x220envelope 162x229envelope 176x250envelope Note: Duplexing is not supported on any envelope size. If duplex printing is requested and one of the envelope size operators is sent to the printer, duplexing is suspended until a paper size is requested that is supported for duplex printing. E321, E323 C912 4-26 PostScript Envelope Tray Support If manualfeed in statusdict and the ManualFeed page device parameter are false when the printer receives one of the envelopetray operators listed in "Table 4-11: Envelopetray Operator Selections" on page 4-27, the printer: · · Sets the PageSize Policy to 0. Checks the active source to see if it matches the requested envelope size. Note: The active source is the last source selected from the printer operator panel or data stream. · If the requested size and the size loaded in the active source do not match, the sources are searched in the order defined by the Priority array in the InputAttributes dictionary in the pagedevice dictionary. If the requested media size is not found by the previous search, the following search order is used: ­ Envelope Feeder ­ Multipurpose Feeder · · If the requested size and type is not available from any automatic source, you are prompted to load the requested envelope size and type in the manual feed source. If the size is still not available, a configurationerror is issued and the print job is flushed. · If manualfeed or ManualFeed is true, the printer prompts you to load the requested size manually. If no manual feed exists on the printer, a rangecheck error message is generated. The envelope tray the printer selects when it receives an envelopetray operator is listed in Table 4-11. These operators are equivalent to executing the following PostScript emulation sequence: <</PageSize [x y] /ImagingBBox null /Policies<</PageSize 0>> >> setpagedevice where x y are the PageSize in points. 4-27 PostScript Table 4-11: Envelopetray Operator Selections Supported Not Supported Tray Operators Printer Model T630, T632, T634 Operator 110x220envelopetray dlenvelopetray 162x229envelopetray c5envelopetray 176x250envelopetray b5envelopetray 3. 875x7. 5envelopetray monarcenvelopetray Tray Selected (Corresponding image size is set) tray with 110 x 220 size envelopes tray with 110 x 220 size envelopes tray with 162 x 229 size envelopes tray with 162 x 229 size envelopes tray with 176 x 250 size envelopes tray with 176 x 250 size envelopes tray with 3. 875 x 7. 5 size envelopes tray with 3. 875 x 7. 5 size envelopes 3. 875x8. 875envelopetray tray with 3. 875 x 8. 875 size envelopes 4. 125x9. 5envelopetray com10envelopetray otherenvelopetray tray with 4. 125 x 9. 5 size envelopes tray with 4. 125 x 9. 5 size envelopes tray with other size envelopes E321, E323 C912 4-28 PostScript Supplemental Operator Summary To determine which operators your printer supports, see Table C-1 on page C-1. appletalktype -- appletalktype (string) in statusdict, this string reflects the current value of the LocalTalkType device parameter from the %LocalTalk% device. To change the type portion (appletalktype) of the AppleTalk network name and redefine the string, execute the following: /appletalktype (string) def When you redefine a string inside the normal server loop, it is reset to the default value at the end of the print job. When you define it outside the normal server loop, it is reset to the default value when the printer is switched to a printer language other than PostScript emulation or when a power-on reset occurs. Errors: rangecheck, stackoverflow, typecheck buildtime -- buildtime integer returns the BuildTime system parameter, which is a timestamp that identifies the specific build of the PostScript emulation interpreter. Error: stackoverflow byteorder byteorder boolean returns a boolean on the stack with the same value as the system parameter ByteOrder. The boolean values indicate: true false low-order byte first high-order byte first Error: stackoverflow 4-29 PostScript checkpassword integer checkpassword or (string) checkpassword checks the passwords for both the SystemParamsPassword system parameter and the StartJobPassword system parameter stored in the printer. If the integer form is used, the integer is converted into a string before the password check occurs. A boolean is returned on the stack to indicate if the specified password matches either password. The boolean value can be: true false correct password incorrect password After the boolean is returned, the printer waits 1 second before it continues processing. Errors: stackunderflow, typecheck Note: The password is defined as a 4-byte number. currentfilenameextend currentfilenameextend boolean returns a boolean on the stack to indicate whether the extension should be automatically added to any filename. The boolean value is either: true false adds the extension does not add the extension See "Filename Extensions" on page 6-10. Error: stackoverflow currentmanualduplexmode integer currentmanualduplexmode queries the current value of the manual duplex mode. An integer is returned on the stack: 0 1 2 current job manual duplex mode is no manual duplex current job manual duplex mode is printing . rst sides of job current job manual duplex mode is printing second sides of job Error: stackoverflow 4-30 PostScript defaulttimeouts -- defaulttimeouts job manualfeed wait queries the user default settings of all timeouts. Three integers are returned on the stack: · JobTimeout system parameter 0 disabled (default) 15. . . 65535 seconds · ManualFeedTimeout page device parameter 0 disabled 1. . . 65535 seconds (default is device dependent) To find the default for your printer, see Table C-2 on page C-4. [. . . ] Operator Name dostartpage dosysstart duplexer duplexmode enginesync file filenameforall fileposition firstside fontnonzerowinding hardwareiomode idlefonts ignoresize initializedisk jobname jobsource jobtimeout manualfeed manualfeedtimeout newsheet pagecount pagesprinted papertray printername product PS2fonts PS3fonts quiet ramsize realformat renamefile Page 4-38 4-38 4-38 4-39 4-39 4-40 4-40 4-40 4-41 4-41 4-41 4-41 4-18 4-42 4-42 4-43 4-44 4-22 4-45 4-45 4-45 4-46 4-22 4-46 4-46 4-47 4-47 4-47 4-48 4-48 4-48 Printer Model E321, E323 T630, T632, T634 C912 C-3 PostScript Support Table C-1: Supplemental Operators (Continued) Supported Not Supported Page numbers reference operator descriptions. Operator Name resolution revision sccbatch sccinteractive setcoverpage setdefaulttimeouts setdoidlefonts setdojamrecovery setdoprinterrors setdoret setdostartpage setdosysstart setduplexmode setenginesync setethernetaddress setfilenameextend setfileposition sethardwareiomode setidlefonts setignoresize setjobtimeout setmanualduplexmode setpapertray setprintername setquiet setresolution setsccbatch setsccinteractive setsoftwareiomode settumble setuniversalsize Page 4-49 4-49 4-50 4-51 4-51 4-51 4-52 4-52 4-52 4-53 4-53 4-54 4-54 4-55 4-55 4-55 4-56 4-56 4-56 4-18 4-57 4-57 4-23 4-58 4-58 4-59 4-59 4-60 4-60 4-60 4-19 Printer Model E321, E323 T630, T632, T634 C912 C-4 PostScript Support Table C-1: Supplemental Operators (Continued) Supported Not Supported Page numbers reference operator descriptions. Operator Name setuserdiskpercent softwareiomode tumble userdiskpercent waittimeout Page 4-61 4-61 4-61 4-62 4-62 Printer Model E321, E323 E321, E323 false false Table C-2: Page Device Parameters Supported Not Supported Page numbers reference parameter descriptions. Key BeginPage Collate DeferredMediaSelection DeviceRenderingInfo · Screening ­ ColorGrade ­ PictureGrade ­ IET ­ IETImagesOnly ­ IETPictureGrade ­ None · TonerSaver · PictureGrade · ImageEnhancement · PrintDarkness · AutoMediaType · EdgeToEdge · DefaultPoliciesPageSize · SubstituteSize Page 4-63 4-63 4-63 4-63 4-63 4-63 4-63 4-63 4-63 4-63 4-63 4-64 4-64 4-64 4-64 4-65 4-65 4-65 4-65 false false Printer Model false PictureGrade false true T630, T632, T634 false false C912 T630, T632, T634 false C912 true C-5 PostScript Support Table C-2: Page Device Parameters (Continued) Supported Not Supported Page numbers reference parameter descriptions. [. . . ]