User manual LEXMARK OFFICEEDGE PRO 4000

[. . . ] 190 Safety information 6 Safety information Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible. Use only the power supply and power cord provided with this product or the manufacturer's authorized replacements. CAUTION—POTENTIAL INJURY: To reduce risk of fire, use only the telecommunications (RJ‑11) cord provided with this product or a UL Listed 26 AWG or larger replacement when connecting this product to the public switched telephone network. CAUTION—SHOCK HAZARD: Make sure that all external connections (such as Ethernet and telephone system connections) are properly installed in their marked plug-in ports. [. . . ] It is not possible to use both Ethernet and wireless at the same time. Networking 106 Indicator light Printer status Off • • • • The printer is turned off or is powering up. The printer is not connected to an Ethernet or a wireless network and is in Sleep mode. The printer has not been configured for an Ethernet or a wireless network. The printer is configured for an ad hoc connection, but it is not currently communicating with another ad hoc device. Blinking green • The printer has been configured for an Ethernet network, but it cannot establish a connection with the • The printer is out of the range of the access point (wireless router). € The printer is trying to communicate with the access point, but the access point is turned off or is not working properly. € The access point has been turned off, and then turned back on, and the printer is trying to establish a connection with the network. Check if the SSID, WEP key or WPA/WPA2 preshared key/passphrase, security type, and IP address that the printer uses are still correct. solid green • The printer is connected to an Ethernet or a wireless network and is ready for use. € The printer is connected to your computer or mobile device through an ad hoc connection. Special wireless installation instructions The following instructions apply to customers outside of North America who are using a wireless broadband box. Some examples of these boxes include LiveBox, AliceBox, N9UF Box, Freebox, and Club Internet. Before you begin • Make sure your box is wireless‑enabled and activated to work on a wireless network. For more information about configuring the box to work wirelessly, see the documentation that came with your box. € Make sure your box is turned on and that your computer is on and connected to your wireless network. Adding the printer to your wireless network 1 Set up your printer for wireless networking using the setup instructions provided. 2 If there is an association/registration button on the back of your box, then press it before selecting a network. Note: After pressing the association/registration button, you have five minutes to complete the printer installation. From the wireless networks list that appears, select your network, and then click Continue. If your wireless network does not appear in the list, then: a Connect to another wireless network. Networking 107 For Macintosh users Select Other Wireless Network from the list, and then click Continue. [. . . ] To obtain warranty service you may be required to present proof of original purchase. You may be required to deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the Lexmark designated location. When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. [. . . ]