User manual LEXMARK MARKNET X2000 QUICK REFERENCE

[. . . ] Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user's responsibility. Lexmark, Lexmark with diamond design, and MarkNet are trademarks of Lexmark International, Inc. [. . . ] After you have assigned and verified the TCP/IP settings, you are ready to configure the printers attached to the print server and set up your network clients to print to them. In Windows environments, your network printers can be configured for direct printing or for shared printing. Direct IP printing--when you want to print directly to a printer on your network Shared printing (point and print, and peer-to-peer)--when you need to centrally manage network printers Detailed information about using each of these printing methods is on the drivers CD. Click View Documentation and look for information about network printer installation. Click View Documentation and look for information about network printer installation for your specific Windows environment. If you choose to install without using the instructions on the drivers CD, you need a basic understanding of network printing on TCP/IP networks, installing printer drivers, and the process involved in creating new network ports. Your printer connects automatically to AppleTalk networks and becomes readily visible to other network clients. X, you must create a printer object (icon) on the desktop of each network client using the LaserWriter 8 printer driver and the custom printer PPD file. For Mac OS X, select Add Printer and create a queue in the print center using the PostScript Printer Module and the custom printer PPD file. Information about creating the printer object on your AppleTalk clients is on the drivers CD that shipped with your printer. Depending upon which version of the drivers CD shipped with your printer, you may also find this software on the drivers CD. Your printer supports many UNIX and Linux platforms, such as Sun Solaris and Red Hat. The User's Guide in each package gives detailed instructions for installing and using Lexmark printers in UNIX and Linux environments. You can download these printer driver packages from Lexmark's Web site at www. Depending upon which version of the drivers CD shipped with your printer, you may also find the driver package you need on the CD. Your printer works with both Novell Distributed Print Services (NDPS) and regular queue-based NetWare environments. If you have an NDPS environment, we recommend you install the Lexmark NDPS IP Gateway. The gateway tightly integrates your printers with NDPS so you can easily monitor, control, and print to them. You can get the gateway, snap-ins, support files, and a white paper with installation instructions from Lexmark's Web site at www. Other information about installing network printers in NetWare environments is on the drivers CD that shipped with your printer. [. . . ] In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. This apparatus is approved under the approval number NS/G/1234/J/ 100003 for the indirect connections to the public telecommunications systems in the United Kingdom. If your product is NOT marked with this symbol , it MUST be connected to an electrical outlet that is properly grounded. The power supply must be connected to an electrical outlet that is near the product and easily accessible. [. . . ]