User manual LEXMARK J110

[. . . ] Edition: July 2000 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. , PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND , EITHER EXPRESS OR IMPLIED , INCLUDING , BUT NOT LIMITED TO , THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. [. . . ] If a sheet or envelope is already in the manual feeder or multipurpose feeder, press Go to clear the message. Select the correct size and press Go to clear the message, or press Menu> and select Cancel Job. To continue printing your job without PerfectFinish, press Go to clear the message. This message appears whenever the PerfectFinish cartridge applicator is refilling. You may hear some clicking sounds as the cartridge applicator refills. If that does not clear the message, try cleaning the copper contact area on the printhead. During its power on cycle, the printer does not detect the external print server. if it is attached to a network , check that the cable is securely connected to your computer. If this does not clear the message, contact the network administrator. If you want to use the parallel port, select Parallel Buffer from the Parallel Menu and then select Auto. If your printer is not responding, first make sure: The printer is turned on The power cord is plugged in Other electrical equipment plugged into the outlet works The printer cable is securely attached to the computer and the printer If all else fails, turn the printer off and back on from the on/off switch (never a power strip). If a message appears on the operator panel, click PRINTER MESSAGES to find out what it means and how to clear it. If you have a paper jam, click CLEARING PAPER JAMS to identify the jam and how to clear it. Solution Check the Paper Size setting in your printer driver and your software application. check the Paper Type and Paper Source settings in your printer driver. Be sure to change orientation to landscape in your printer driver before printing an envelope. Your printer driver overrides all but the Paper Size and Paper Type settings set from the operator panel. You installed the 250-sheet drawer (or the multipurpose feeder) but the printer driver does not recognize it. Make sure the printer is on the drawer correctly and that both sides of the printer are lined up with the drawer. If you are using Windows, make sure you added the option in Printer Configuration. 1 Turn the printer off and back on from the on/off switch -- never from a power Raise the carrier handle up and back down to reposition the printheads. If this does not clear the message, try cleaning the copper contact area on the printheads. [. . . ] Enables print management over your existing intranet infrastructure using TCP/IP. Network users and administrators can also use the following MarkVision features to increase productivity. Locate printers quickly in your organization by positioning printer icons on a map to show not only printer status, but also actual printer location. Search for devices using criteria such as printer status and installed features. [. . . ]