User manual LEXMARK FORMS PRINTER 2400

[. . . ] Lexmark Forms Printer 2400 Series User's Guide Edition: June 2000 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. , PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. [. . . ] For help see "Loading continuous forms" on pag e46. 89 Entering Setup mode 1 Open the operator panel cover to access layer 2. 2480/2481 2490/2491 1 Power Set TOF 2 3 Macro 4 Power Macro 1 2 3 Macro 4 LineFeed Set TOF LineFeed Macro Using Setup mode Micro Micro Setup Micro Micro Setup Pitch Lock 10 12 15 17 20 PS Pitch Lock 10 12 15 17 20 24 PS 2 Pressing Setup puts the printer in Setup mode and prints the Main Menu. 90 3 Press LineFeed to print a list of all the available options you can change. Printer Setup mode - Main Menu -------------------------------------------------Press To Select --------------------Exit and Save Setup Print All Forms Macro Options Data Options Control Options Emulation Options Interface Options Set TOF LineFeed Macro Micro Micro Setup Pitch Using Setup mode 4 Select any option from the Main Menu by pressing the corresponding button. A new menu prints each time you press a button, displaying new selections. After you make all your selections the printer prints a page with your changes reflected. The following example illustrates how to change the Menu Language setting. 5 91 Example: Changing the menu language setting 1 2 With the printer in Setup mode, press Micro to print the Control Options menu. Press Pitch to print more control options. Control Options -----------------------Current -----------Off On Enabled Enabled Press -------Set TOF LineFeed Macro Micro Micro Setup Pitch Using Setup mode Return to Main Menu Uni-Dir Printing Auto Ready Cut Sheet Paper Out Alarm Bi-Di Alignment Demo Print (More) 3 To change the Setup menu language, press Macro. Control Options -----------------------Return to Main Menu Return to previous page Menu Language TOF Read Quiet Current -----------English Enabled Press -------Set TOF LineFeed Macro Micro Micro 4 Press the button that corresponds to the language you want, or press Setup to print more Menu Language options. 92 5 For this example, press Macro to select French. Menu Language ------------------------To Select -------------No Change English French German Italian (More) Return to Main Menu Press -------Set TOF LineFeed Macro Using Setup mode Micro Micro Setup Pitch Printer menus now print in French. Manu contrle -----------------------Retour menu principal Revenir la page prcdente Menu langue Lecture haut de page Silence Francais Activ Dsactiv En cours -----------Appuyez sur ----------------Db page Ligne MACRO Micro Micro 6 7 Press Pitch to return to the Main Menu or press Set TOF (No Change) to go back one menu and change another setting. If you return to the Main Menu, press Set TOF to exit Setup mode and save the new setting. 93 Exiting Setup mode 1 Press Set TOF until the printer returns to the Main Menu or press Pitch from any menu containing a Return to Main Menu selection. New settings are saved only when the printer exits Setup mode. 2 Using Setup mode Note: If the printer runs out of paper while using Setup mode, load more paper into the Tractor pins and press Setup to continue. 94 Setup menu options Use Setup mode to configure your printer according to your business needs. Note: To print a list of all default settings, select Print All from the Main Menu. This table describes the different options and controls you can select for your printer. Menu options Menus Forms Macro options Using Setup mode What it controls . . . Lets you customize macros to print a variety of forms. See "Forms Macro menu options" on page 96. Data options Defines how information that is sent to the printer is processed. See "Data menu options" on page 100. Control options Defines how the printer performs many of its basic tasks. See "Control menu options" on page 102. Emulation options Determines how the printer interacts with your software application. See "Emulation menu options" on page 103. Interface options Defines how information is transferred from your computer to the printer. See "Emulation menu options" on page 103. The following tables outline and explain the many functions and settings you can use with your printer. 95 Forms Macro menu options Macro options Use these menu options Set Default Macro When you want to customize. . . Select the macro you want to be the default when the printer is powered On or select disable if you do not want to use a macro as the default. Default font Select the font you want from the available fonts listed. Font Lock Enabling this setting lets you set Font Lock as the default even after the printer is turned Off and back On. Default Pitch Select from the following pitches: 10, 12, 15, 17, 20, (24 for 2490/2491), and PS pitch. Pitch Lock Enabling this setting lets you set Pitch Lock as the default even after the printer is turned Off and back On. Code Page You may select one of the following code pages: 437, 850, 858, 860, 861, 863, 865, 437G, 813, 851, 853T, 857, 869, 920, 1004, and 1053. Character Set 2 is the factory default for EMEA. Character options Using Setup mode 96 Macro options (continued) Use these menu When you want to customize. . . options Character options (continued) 20-Pitch This setting enables or disables the 20-pitch mode, and provides compatibility with other IBM printers. Note: Available for the 2480/2481 printers When set to Enable, switching from 12 cpi to condensed (Dec 15, Hex 0F) changes the pitch from 12 cpi to 20 cpi. When set to Disable, switching from 12 cpi to condensed (Dec 15, Hex 0F) does not change the pitch. Paper handling options Auto Tear Off When set to On, Auto Tear Off moves continuous form paper to the Tear Off bar. [. . . ] You may be required to deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the designated location. 158 At a Lexmark designated location. When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement item assumes the remaining warranty period of the original product. [. . . ]