User manual LEXMARK 4227 PLUS

[. . . ] 4227 plus User's Guide First Edition (November 1998) The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. , PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. [. . . ] The option also includes a manual feed tray that lets you manually feed a single sheet of paper. This section includes instructions for loading paper in the automatic sheet feeder and the automatic sheet feeder's manual feed tray. 80 Chapter 5: Printer Options Loading Paper for Automatic Feed 1 2 3 4 5 If continuous forms are loaded, park them. For help parking continuous forms, see step 1 of "Parking Continuous Forms and Changing Tractor Feeders" on page 97. Move the paper select lever up to the single sheet Pull the paper supports to the upright position. Pull the locking lever forward to allow paper to be loaded. Locking Lever position. Printer Options 6 Place single sheets into the Auto Sheet Feeder. Note: Place letterhead paper with the letterhead facing up and toward the printer. The paper level should not exceed the markings on the Chapter 5: Printer Options 81 label located on the inside of the paper holder. Printer Options 7 Move the paper guide so the print start position you want aligns with the symbol [A printed on the margin guide of the Auto Sheet Feeder. Printing begins at the [A symbol. Margin Guide Left Paper Guide The distance from the [A symbol to the left paper guide determines the left margin. 8 82 Move the right paper guide to match the paper width you are using. Chapter 5: Printer Options 9 Push the locking lever in toward the printer. Locking Lever Printer Options 10 Press Start/Stop. The Ready light comes on and you are ready to print. Loading Paper for Auto Sheet Feeder Manual Feed If continuous forms are currently loaded on the printer, park the continuous forms before performing these steps. For help parking continuous forms, see steps 1 and 2 of "Parking Continuous Forms and Changing Tractor Feeders" on page 97. 1 2 Push the paper select lever up to the single sheet Pull the locking lever forward. position. Chapter 5: Printer Options 83 Note: After you finish printing on manual insertion paper, move the locking lever back to let paper feed automatically. Locking Lever Printer Options Paper Select Lever 3 Set the left margin. Move the paper guides so that the print start position you want aligns with the symbol [A printed on the margin guide. Note: If you make a left margin setting in your application software, it is added to the left margin setting on the printer. For example, if you set the left margin at 1 inch (2. 54 cm) on the printer, and also have the left margin set at 1 inch (2. 54 cm) in your application software, the printer begins printing 2 inches (5. 08 cm) from the left edge of the page. 4 Insert paper all the way into the printer. The paper feeds automatically to the Top-Of-Form (TOF) when the Auto Sheet Feeder option is on. Note: After you finish printing on manually inserted paper, move the locking lever back to let paper feed automatically. 84 Chapter 5: Printer Options Printing begins at the [A symbol. Left Paper Guide Margin Guide The distance from the [A symbol to the left paper guide determines the left margin. Printer Options Tractor 2 Feeder The Tractor 2 Feeder attaches to the front of your printer and provides dual tractor capability with a second tractor feed for continuous forms. This option lets you have two different types of continuous forms loaded on your printer at the same time. (A convenient manual feed tray on top of the feeder allows you to manually feed cut sheets or envelopes while the feeder is installed. ) Chapter 5: Printer Options 85 Installing the Tractor 2 Feeder The Tractor 2 Feeder is easy to install. Note: Before installing the Tractor 2 Feeder, make sure continuous forms are loaded on the other tractor feeder. (When Tractor 2 is installed, you must remove it from the printer to load continuous forms on the other tractor feeder. ) For help loading continuous forms on the other tractor feeder, see "To load continuous forms:" on page 63. 1 2 Make sure the PC and the printer is Off and unplugged. Open, pull up, and remove the front cover. Printer Options 3 4 5 If necessary, push the paper select lever down to the continuous forms position. Remove all tape from the Tractor 2 Feeder including the tape that holds the Tractor 2 Feeder cable to the Tractor 2 Feeder. [. . . ] A line printed over a slant to the right. character. K KB/Kbyte. A denser print mode that that links a printer to a computer, by which all 8 bits of a character are sent at the same time. park. The line position of the continuous forms operation while single sheets or envelopes are printed. pinfeed. A device that guides and feeds paper by means of pins that engage holes in the side of the paper. [. . . ]