User manual LEXICON STUDIO ADDENDUM

[. . . ] The document you are reading is very important, because it contains all of the late-breaking information about Lexicon Studio that either did not make it into the printed manual and pdf manual, or were information about features that were altered and improved prior to release. The information in this document supersedes all similar information within the Lexicon Studio User Guide. Also, remember that our Website is updated often, and you will always be able to find the latest information there. Without you, we could never be. . . Table of Contents SYSTEM REQUIREMENTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 34 Tight Ambience Algorithm: Ambience An ambience with a very short Decay, but relatively high Decay Level to keep the density up. 35 Sloppy Place Algorithm: Ambience An unnatural room that will enhance percussive sources. 36 Hardwood Room Algorithm: Ambience Designed to sound like a room with a hardwood floor. The PreDelay is set for 46 ms, so the wet mix sounds like the microphone at the back of the room. 38 Locker Room Algorithm: Ambience The reflective and bright ambience of a locker room. 40 Phone Booth Algorithm: Ambience A tight environment that is similar to the Iso Booth preset, but a bit more reflective since it's made out of glass. Lexicon Studio User Guide Addendum 41 Long Nonlinear Algorithm: Inverse A long, inverse reverb. Creates a lush reverb around the source, but cuts off before muddying the dry signal. 42 Short Nonlinear Algorithm: Inverse Similar to Long Nonlinear, but a faster cutoff on the reverb tail. 43 Inverse Hall Algorithm: Inverse A spacious reverb that sounds similar to a hall at first, but turns unnatural once you hear the reverb tail cut off. 44 Wave Rush Algorithm: Inverse An in-your-face gated reverb that slams down abruptly at the cutoff. 46 Clip Gate Algorithm: Inverse Subtle, but not as tight as Pico Gate. 47 Reversals Algorithm: Inverse A special effects preset for just about any type of source. Listen to this at 100% wet, and use as an insert within your source, rather than an aux send. 48 Pump Verb Algorithm: Inverse An inverse reverb with a pumping sensation. 49 CyberVerb Algorithm: Inverse A nonlinear reverb with a very unnatural retort from the echo delays. A very useful special effect preset that sounds cool on lots of sources from drums to dialog. 50 Invertigo Algorithm: Inverse A similar preset to Reversals but even more over-the-top. Listen to this preset at 100% wet and use as a line insert, rather than an aux send. Your source will become 800 ms late so you may need to adjust the placement of the recorded track so that it lines up with your other tracks again. Lexicon Studio User Guide Addendum PC-90 Bank2: Applications The PC-90 presets for Bank 2 are created specifically for a particular instrument. Additionally, presets are subgrouped for the particular application they are meant for, whether it is for drums, vocals, brass, guitar, or dialog. [. . . ] At this time, the use of the ADATSYNC 12T selection is reserved for expanded features in an upcoming software release. Timecode To use timecode within Lexicon Studio and Cubase, the following settings within their respective areas are required: Core-32 Timecode Settings: 1. Connect a timecode source to your Timecode Input on the front panel of the LDI-12T. Check `Enable Timecode Reader' and select LDI12T LTC as your timecode source (this is a default setting). [. . . ]