User manual LEXIBOOK ST5Z

[. . . ] When changing the batteries, do not press any key on the remote control. Once you complete the setup procedure, the Lexibook® Universal 5 in 1 Remote Control will allow you to control the various audio-video devices you have at home. When you use the remote, first select the type of device you wish to use by pressing the corresponding device key (TV, CD/DVD, VCR, SAT or AUX). Aside from the 5 device keys and the macro keys, all other keys on the remote control are only operative if your device also has these functions. [. . . ] Press the SET key ( SET ) first and hold it down while pressing the respective device key on your remote control, hold both keys down. For example: to program your TV, press first SET and then TV1 simultaneously. Use the numeric keys to enter the 3-digit code applicable for your device. If your remote control's keys do not work, you did not find the right code. Try the next 3-digit code corresponding to your device's brand in the list: repeat steps 3 to 7, until your device responds correctly to the keys pressed on the remote. notes: Press the respective DEVICE button if you wish to stop the manual setup. If no button is pressed for more than 15 seconds, setup ends automatically and the LED goes off. If your device cannot be programmed using manual setup or its code is not in This search should be used only if Quick Search did not work. Press the SET key followed by the POWER ( ) button on your remote control. 5 codes are transmitted at a time; there is a 5-second period between each transmission, approximately 9 minutes in total. When your device switches off, then the correct code range has been found. Promptly press the respective DEVICE key to auto search within these five codes. Go back to your device and switch it ON again (with the original remote or using the front panel buttons). Aim the remote to your device: when your device switches off, the correct code has been found. During step 5, the SET button can be pressed to return to step 3 Check whether all applications of your device can be operated with the remote control keys. Tips for quick and auto search modes: - Some devices cannot be powered on/off using the remote control. In such case, use the PLAY button instead of POWER to check if the device responds to the remote control. - All the function buttons except POWER and PLAY can be verified without exiting the quick search mode. If no button was pressed for more than 30 seconds, setup stops automatically, the LED goes off. Should your remote control still not work, check the codes list again and repeat the setup procedure (manual or code search) until you find the correct code. Storing your favourite channels and child lock The FAVCH key allows you to store your favourite channels or limit the number of channels accessible to your children. The following number of channels can be stored or retrieved using the FAVCH button: Press and hold the SET button and the FAVCH button simultaneously until the LED lights up. [. . . ] Our guarantee covers manufacturing or assembly defects with the exception of all damage resulting from a failure to respect the instructions, or any inappropriate handling of the article (such as taking it apart, exposing it to heat or humidity, etc). Note: It is recommended that all packaging be kept for future reference. Keep this instruction manual in a safe place as it contains important information. Disclaimer: In our constant concern for improvement, the colours and details of the product may differ slightly from those shown on the packaging. [. . . ]