User manual LEXIBOOK SMP300

[. . . ] Congratulations on purchasing this Lexibook® SMP300 alarm clock and weather station, with its two exclusive features : measurement of atmospheric pressure, projection of time and weather forecasts. We recommend you reading this manual thoroughly to ensure you make the most of your unit. GETTING STARTED Before you start using the alarm clock for the first time : 1. [. . . ] Press twice to read the display of the measurement taken two hours ago, and so forth for the past 8 hours. The recorded atmospheric changes for the past 8 hours are displayed in a visually clear bar chart. Press and hold [PRESSURE MEMORY/UNIT] for two seconds to switch the pressure units from mb/hPa to inHg. WEATHER FORECASTING The unit's detection of atmospheric pressure changes enables one to predict the probable weather conditions for the forthcoming 12 hours. The main electricity supply via the adapter or that you have inserted 2 AA/LR6 batteries in their compartment (see below). BATTERY REPLACEMENT This alarm clock uses two AG13/LR44 batteries and an AC adapter (or two AA/LR6 batteries) or equivalent. Insert the batteries, taking care to follow their polarity directions. Lexibook® does not guarantee in any way the accuracy of weather predictions. hYGROMETER The indoor relative humidity is measured and displayed within a range of 30% to 90%. The relative humidity within a home will affect the comfort level of its occupants, as well as their respiratory system. Use the [FOCUS] knob at the back of the unit to adjust the sharpness of the projection. In order for the projection to operate, make sure you have connected the unit to DO NOT mix new and old batteries or batteries of different types. If battery leakage occurs and comes in to contact with the skin or eyes, wash immediately with plenty of water. Ensure batteries are disposed of safely according to the battery manufacturers' instructions. [. . . ] ⷠWhen cleaning the display and casing, only use a soft damp cloth. Do not use solvents or scouring agents as they may mark the LCD and casing. Output: DC 3V Stroom: >150mA Binnenste plug: positieve pool (+ve), 2, 5mm Buitenste plug: negatieve pool (-ve), 5, 5mm RESET Indien er iets fout loopt, druk dan met een scherp voorwerp op [RESET] op de onderkant van het toestel om terug in normale modus te kunnen werken. [. . . ]