User manual LEXIBOOK SMBABY1

[. . . ] Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the unit. Unplug this unit during lightning storms or when unused for long periods of time. Servicing is required when the unit has been damaged in any way, such as the following: the power-supply cord or plug has been damaged; liquid has been spilled or objects have fallen into the unit; and/or the unit has been exposed to rain or moisture, does not operate normally, has changed its performance or has been dropped. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. [. . . ] Rechargeable batteries are to be removed from the product before being charged. rechargeable batteries are only to be charged under adult supervision. Different types of batteries or new and used batteries are not to be mixed. Only batteries of the same or equivalent type as recommended are to be used. Remove the batteries if you are not going to use the product for a long period of time. wARNING: If the units malfunction or receive an electrostatic shock , press the RESET buttons. If this proves to be ineffective, remove the batteries and insert them again. Night li Use the light in t Place the unit in the child's bedroom, on a side table using the removable stand, on the door handle or above the bed using a strap (not included). Use the selector switch located on the top of the unit to turn on or turn off ("OFF" position) the "Sleep Guardian" function or to select one of the 5 modes: · Use the volume button with the slider on the back The "Sleep Guardian" feature can also be started or stopped manually with the "Star" button on the front . Night light mode Use the "Night light" On/Off button located on the top of the unit to switch on light in the moon. "Comfort Zone" indicator Press the cloud-shaped "Comfort Zone" button on the front of the Baby unit and the light in the moon will indicate if the conditions in the baby's room are comfortable. Green indicates good conditions (temperature between 16 and 20 degrees C° and humidity between 0 and 60 %). Red means out of comfort zone (temperature not between 16 and 20 degrees C° or humidity not between 0 and 60 %). "Baby Monitor" transmission mode Use the transmission mode switch located at the back of the Baby unit to select the desired transmission mode. Noise activated (default mode): the transmission starts only when noise is detected in the Baby's room. Transmission channel selection Use the channel selection switch on the back of the unit to select a transmission channel (1, 2 or ) for the Baby unit. Switch the parent unit On/Off Use the volume switch on the right side of the Parent unit to turn it on or turn it off. Turn the "Baby Monitor" feature On/Off Press the "Baby Monitor" On/Off button to switch on or switch off the "Baby Monitor" feature. If the channels are different, the Parent unit will not be able to receive the data sent by the Baby unit. Temperature display in Celsius/Fahrenheit Use the « Temperature » button located on the front to toggle the temperature display between Celsius and Fahrenheit. [. . . ] nOTE: Please keep this instruction manual , it contains important information. For any claim under the warranty or after sale service, please contact your distributor and present a valid proof of purchase. Our warranty covers any manufacturing material and workmanship defect, with the exception of any deterioration arising from the non-observance of the instruction manual or from any careless action implemented on this item (such as dismantling, exposition to heat and humidity, etc. In a bid to keep improving our services, we could implement modification on the colours and the details of the product shown on the packaging. [. . . ]