User manual LEXIBOOK SM980

[. . . ] The MeteoClock SM980 incorporates different functions: - Thermometer: Temperature is displayed in real time to the nearest tenth of a degree Celsius. Thanks to its wireless sensor, the station can sense from a distance the outside temperature or that of another room!- Hygrometer: Outdoor or indoor hygrometry is expressed in percentage of humidity in the ambient air. [. . . ] Press + or - key to adjust year. Copyright © Lexibook 2005 7 SM980IM_GB 15/03/2005 11:22 Page 8 DATE, YEAR & ALARM SETTING Alarm 1and Alarm 2 Setting Scroll to Alarm1 mode (Alarm2 mode) using MODE. Press HOUR to set hour. Press MIN to set minute When the alarm is set ON, the bell symbol will appear. When Alarm Sounds 1 or 2 will flash Press ON/OFF to toggle alarm on and off. Press SNOOZE to snooze the alarm for 5 minutes. After that the alarm will sound again. Press ANY other key will shut off the alarm. Without interruption, alarm will shut off automatically after one minute. 8 Copyright © Lexibook 2005 SM980IM_GB 15/03/2005 11:22 Page 9 MOON PHASE The moon phase is automatically updated according to the year/month/day. Moon Phase Display New Moon Young Crescent First Quarter Waxing Gibbous Full Moon Waning Gibbous Last Quarter Old Crescent Copyright © Lexibook 2005 9 SM980IM_GB 15/03/2005 11:22 Page 10 TEMPERATURE & HUMIDITY DISPLAY Check Local Temperature (Inside) After insert batteries, local temperature will display Check Remote Temperature & Humidity Press CHN to toggle between Channel 1, 2 and 3. Temperature and humidity readings will alternate on the receiver. °C or °F Temperature Display Toggle between °C and °F by pressing °C/°F at Clock2 mode. Note: Min/Max readings are automatically cleared daily at 00:00. Min and Max Temperature & Humidity Press MIN in Clock1 mode to display minimum temperature and humidity. Press MAX in Clock1 mode to display maximum temperature and humidity. 10 Copyright © Lexibook 2005 SM980IM_GB 15/03/2005 11:22 Page 11 TEMPERATURE & HUMIDITY TREND The trend indicator shows the trend of temperature & humidity determined by the particular sensor in the past half hour interval. TEMPERATURE ALARM You can set high temperature or low temperature alarms for one local and one for one remote channel. Local temperature alarm Scroll to local temperature alarm mode by using MODE (Inside). Press ALARM key continuously to scroll and select the high temperature alarm, low temperature alarm or disable the alarm function. Press MODE to finish. Copyright © Lexibook 2005 11 SM980IM_GB 15/03/2005 11:22 Page 12 Outdoor temperature alarm Scroll to remote channel temperature alarm mode by using MODE. Press + or - key to set the temperature limit value. Press ALARM key continuously to scroll and select the high temperature alarm, low temperature alarm or disable the alarm function. When temperature alarm sounds It is to alert that the temperature has exceeded the preset temperature limit. Press any key to stop temperature alarm; or If no key is pressed, the temperature alarm will automatically stop itself after one minute. Once triggered, temperature alarm comes on as a distinctive sound, different to that of Alarm1 and Alarm2. 12 Copyright © Lexibook 2005 SM980IM_GB 15/03/2005 11:22 Page 13 WEATHER DISPLAY Animated weather forecast symbols This weather station is capable of detecting barometric pressure changes, and based on the data collected, can predict the weather for the next 12 to 24 hours. The effective range covers an area of 30 ­ 50km. Storm Alert * Storm symbol will flash to warn of thunderstorm. [. . . ] Receiver is no longer receiving remote sensor signals or display. Solution : Wait for about 1-2 minute to ensure the remote sensor and receiver are in phase. Otherwise, re-synchronize receiver by holding CHN for 3 seconds until a beep is heard. - Make sure remote sensor is away from sources of electrical disturbance. 16 Copyright © Lexibook 2005 SM980IM_GB 15/03/2005 11:22 Page 17 SPECIFICATIONS This product is covered by our two-year warranty. WARRANTY To make use of the warranty or the after-sales service, please contact your retailer and supply proof of purchase. [. . . ]