User manual LEXIBOOK SM80BB

[. . . ] Congratulations on your purchase of the Lexibook SM80BB BarbieTM alarm clock!Please note: Should you wish to change the time without reinitialising the unit, keep the SET key pressed for more than 2 seconds and then follow the instructions given above. Press SET key and hold 2 seconds to enter date setting mode: the date will blink. [. . . ] Press SET key and hold 2 seconds to enter Low Temperature/Humidity Alarm setting mode. Press ADJUST key to toggle low temperature alarm on/off, (the temperature scale ranges from -50°C to +69°C). Press ADJUST key to increment low temperature value if low temperature alarm is on. Press ADJUST key to toggle low humidity alarm on/off, (the humidity rate ranges from 20 to 89%). Press ADJUST key to increment low humidity value if low humidity alarm is on. If temperature/humidity is lower than the setting value, a 5 seconds alert is announcing after each sampling time. Press the ADJUST key until "LOW" disappear from the temperature screen display. Press the ADJUST key until "LOW" disappear from the humidity rate screen display. Press the ADJUST key until "HIGH" disappear from the temperature screen display. Press the ADJUST key until "HIGH" disappear from the humidity rate screen display. Press 5 times on the MODE key to enter In / Out door Temperature Mode. Press ADJUST key to choose between the In / Out door temperature and the corresponding "IN" or "OUT" icon will blink. Within this minute, press SNOOZE key to activate snooze function and pause the alarm announcing. Press 4 times on the MODE key to enter High Temperature/Humidity Alarm Mode. [. . . ] A paper clip) in order to press the RESET button located at the back of the unit. To make use of the warranty or the after-sales service, please contact your retailer and supply proof of purchase. Our warranty covers material or installation-related defects attributable to the manufacturer, with the exception of wear caused by failure to respect the instructions for use or any unauthorised work on the equipment (such as dismantling, exposure to heat or damp, etc. [. . . ]