User manual LEXIBOOK SM1400

[. . . ] The MeteoClock SM1400 incorporates different functions: - Thermometer: Temperature is displayed in real time to the nearest tenth of a degree Celsius. Thanks to its wireless sensor, the station can sense from a distance the outside temperature or that of another room!- Hygrometer: Outdoor or indoor hygrometry is expressed in percentage of humidity in the ambient air. The ideal "Comfort" Zone for the human body ranges from 35 to 65% hygrometry for a given temperature in between 18 and 24ºC. [. . . ] Press MODE or do not press any key for 1 minute to finish clock setting. Press + or - key to change the hour (in one hour increments/decrements relative to Clock 1). Copyright © Lexibook 2004 7 DATE, YEAR & ALARM SETTING Date Setting Scroll to date mode using MODE. Press + or - key to adjust year. 8 Copyright © Lexibook 2004 DATE, YEAR & ALARM SETTING Alarm 1and Alarm 2 Setting Scroll to Alarm1 mode (Alarm2 mode) using MODE. When Alarm Sounds 1 or 2 will flash Press SNOOZE to snooze the alarm for 5 minutes. Without interruption, alarm will shut off automatically after one minute. Copyright © Lexibook 2004 9 MOON PHASE The moon phase is automatically updated according to the year/month/day. Moon Phase Display New Moon Young Crescent First Quarter Waxing Gibbous Full Moon Waning Gibbous Last Quarter Old Crescent 10 Copyright © Lexibook 2004 TEMPERATURE & HUMIDITY DISPLAY Check Local Temperature (Inside) After insert batteries, local temperature will display Check Remote Temperature & Humidity Press CHN to toggle between Channel 1, 2 and 3. Temperature and humidity readings will alternate on the receiver. °C or °F Temperature Display Toggle between °C and °F by pressing °C/°F at Clock2 mode. Note: Min/Max readings are automatically cleared daily at 00:00. Min and Max Temperature & Humidity Press MIN in Clock1 mode to display minimum temperature and humidity. Press MAX in Clock1 mode to display maximum temperature and humidity. Copyright © Lexibook 2004 11 TEMPERATURE & HUMIDITY TREND The trend indicator shows the trend of temperature & humidity determined by the particular sensor in the past half hour interval. TEMPERATURE ALARM You can set high temperature or low temperature alarms for one local and one for one remote channel. Local temperature alarm Scroll to local temperature alarm mode by using MODE (Inside). Press ALARM key continuously to scroll and select the high temperature alarm, low temperature alarm or disable the alarm function. Press MODE to finish. 12 Copyright © Lexibook 2004 Outdoor temperature alarm Scroll to remote channel temperature alarm mode by using MODE. Press ALARM key continuously to scroll and select the high temperature alarm, low temperature alarm or disable the alarm function. When temperature alarm sounds It is to alert that the temperature has exceeded the preset temperature limit. Press any key to stop temperature alarm; or If no key is pressed, the temperature alarm will automatically stop itself after one minute. Once triggered, temperature alarm comes on as a distinctive sound, different to that of Alarm1 and Alarm2. Copyright © Lexibook 2004 13 WEATHER DISPLAY Animated weather forecast symbols This weather station is capable of detecting barometric pressure changes, and based on the data collected, can predict the weather for the next 12 to 24 hours. The effective range covers an area of 30 ­ 50km. Storm Alert * Storm symbol will flash to warn of thunderstorm. About Snow Freeze Warning * Snow symbol will flash to warn of 'snowing'. * Activated when Channel 1's temperature is between -1. 9 °C and +2. 9 °C. * Snow will appear solid if and when Channel 1's temperature falls below -1. 9 °C: it is freezing. [. . . ] Otherwise, re-synchronize receiver by holding CHN for 3 seconds until a beep is heard. Ensure the remote sensor is out of direct sunlight, and away from sources of heat. - Make sure remote sensor is away from sources of electrical disturbance. The temperature measurement of remote sensor and receiver does not match. Temperature reading of outdoor remote sensor seems to high. Receiver is no longer receiving remote sensor signals or display. Copyright © Lexibook 2004 17 ACCESSORIES Additional sensor : Mesure temperature and hygrometry in other places! [. . . ]