User manual LEXIBOOK RP200

[. . . ] â· The RCC signal can also be triggered by holding the key for 2 seconds in time mode. â· When the unit is searching or receiving the RCC signal (which lasts about 5 minutes), none of the keys is working except the key. â· Press and hold the key for 2 seconds if you wish to stop to the RCC signal search. [. . . ] It will ring again the next day at the same time unless the alarm is turned off. - When the alarm rings and the snooze function is on, press any key to stop the alarm momentarily. It will ring again 10 minutes later, unless the snooze function is turned off. The RP200 radio displays 6 FM groups (FM1 to FM6) and each group has 5 memory spaces (S1 to S5) available to store up to 30 radio frequencies. Press the [RADIO] key to turn on the radio or the radio wake-up function. To store a frequency into one of the 5 spaces available (S1 to S5), select a frequency and press and hold for 2 seconds the space key (S1 to S5) you wish to store it in. Once a frequency is stored, simply press the corresponding space key to tune in to that frequency. This function allows you to scan all the radio frequencies within the reception range of your unit and saves them into the radio memory spaces. The first frequency will be saved in the S1 space of FM1, the second frequency in S2, FM1, and the last one in S5, FM6. `SCN' is displayed onscreen during the auto scan and the frequency digits move up quickly. Once the auto scan is over, the first frequency stored will be displayed. Key to toggle between temperature display To set the time at which you wish the unit to count down from, press and hold [SET] until hour digit flashes. To set the time at which you wish the radio to turn on, press and hold [SET] until hour digit flashes. When using a DC adaptor (optional and not included) - If an external transformer is plugged into the DC jack, the projector will stay on while the projector switch is set to the position . Please contact your retailer to get a compatible adaptor following this specification. Insert the batteries, taking care to follow their polarity directions. Rechargeable batteries are to be removed from the toy before being charged. rechargeable batteries are only to be charged under adult supervision. [. . . ] Please actively support the conservation of resources and help protect the environment by returning this appliance to a collection centre (if available). Never place the projection clock in areas subject to vibrations and shocks as this may damage it and cause inaccurate readings. â· Avoid exposure to sudden changes in temperature such as direct sunlight, extreme cold and wet or moist conditions. [. . . ]