User manual LEXIBOOK RCD150FE

[. . . ] The product may be mounted to a wall only if recommended by the manufacturer. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks. Please avoid using this unit in places of high temperature or humidity over prolonged periods of time as damage may occur. Exposure to direct sunlight in places such as car interiors may cause the unit to become warped and/or lead to malfunctioning. [. . . ] The socket-outlet shall be installed near the equipment and shall be easily accessible. Slide the FUNCTION switch to the RADIO position to turn the unit on and select Radio mode; the POWER indicator will light. If you are listening to a weak FM Stereo station, you can usually improve the reception by sliding the BAND switch from FM ST. To turn the radio off, slide the FUNCTION switch to the OFF position; the POWER indicator will turn off. ANTENNAS AM­AM­This unit has a built-in ferrite rod antenna, which provides adequate reception in most areas. Slide the FUNCTION switch to the CD position to turn the unit on and select CD mode; the POWER indicator will light. Insert a disc onto the center spindle (label side up) and push down gently to make sure it is securely on the spindle. Insert the headphones (not included) into the HEADPHONE jack or just listen through the speakers. The player will read the Table of Contents and the display will show the total number of tracks on the disc. To skip forward or backward through the tracks on the disc, press and release the SKIP/SEARCH or button. To search forward or backward through the disc, press and hold the SKIP/SEARCH or button. To turn the unit off, slide the FUNCTION switch to the OFF position; the POWER indicator will turn off. This unit is capable of playing standard CDs or 3" singles; no adapter is required. If a disc is inserted incorrectly, dirty, damaged or not present at all, "no" will appear in the display. Although this unit can read CD-R and CD-RW discs, in addition to normal CDs, the playability of those discs may be affected by the type of software that was used to create the discs, as well as the blank media you are using. AUX IN Jack By using a home audio connection cable (not included), you can listen to an external audio unit through this unit's speakers. Slide the FUNCTION switch to AUX to turn the unit on and select AUX mode. Plug a connection cable (not included) between the AUX or LINE OUT jack on the external audio unit and this unit's AUX IN jack (side of the unit). ) Turn on the external audio unit and start playback; the external unit's output sound will be heard through this unit's speakers. To turn the unit off, remove the plug from the AUX IN jack, then slide the Function switch to OFF. Press the SKIP/SEARCH or button to select a track and press the PLAY/ PAUSE button to start playback and the unit will play the selected track over and over until the STOP ( ) button is pressed. Press the PLAY/PAUSE button to start playback and the unit will then play all the tracks on the CD over and over until the STOP ( ) button 2 is pressed. [. . . ] CAUTION Never allow any water or other liquids to get inside the unit while cleaning. If you experience a problem with this unit, check the chart below before calling for service. To make use of the warranty or the after-sales service, please contact your retailer and supply proof of purchase. Our warranty covers material or installation-related defects attributable to the manufacturer, with the exception of wear caused by failure to respect the instructions for use or any unauthorised work on the equipment (such as dismantling, exposure to heat or damp, etc. [. . . ]