User manual LEXIBOOK NLC800

[. . . ] Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Unplug this apparatus during lightning storms or when unused for long periods of time. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture does not operate normally, or has been dropped. Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. [. . . ] Upon completion of any service or repairs to this product, ask the service technician to perform safety checks. When unpacking, ensure that the following elements are included: 1 x Toy Story CD Player 1 x AC cable 1 x instruction manual WARNING: All packaging materials, such as tape, plastic sheets, wire ties and tags are not part of this product and should be discarded. Insert the small end of the AC cord into the AC socket at the back of the unit. Plug the other end of the AC cord into any convenient AC 230V ­ 50Hz mains power socket. Note: The socket-outlet shall be installed near the equipment and shall be easily accessible. Using a screwdriver, open the battery compartment cover located at the back of the unit. Note: The AC power cord must be disconnected from the AC socket on the rear of the unit in order for the product to operate on battery power. Rechargeable batteries are to be removed from the product before being charged. rechargeable batteries are only to be charged under adult supervision. Different types of batteries or new and used batteries are not to be mixed. Only batteries of the same or equivalent type as recommended are to be used. If a disc is installed incorrectly, dirty or damaged, it will not play. To prevent damage to the disc, never open the CD door while the disc is rotating. To repeat continuously a single track, press the Repeat button once while in play mode. To repeat all the tracks, press the Repeat button twice while in play mode. To cancel the repeat function, repeatedly press the Repeat button until "REP1" or "REP ALL" disappears from the screen. Use the program function to preselect the order in which a sequence of tracks will be played. To cancel the program function, press the Stop button twice, "PROG" will disappear from the display. You can play music through the speakers of this CD Player by connecting its AUX IN jack to your MP3 or other digital audio player. Plug one end of an audio cable (not included) into the AUX IN jack located at the back of the unit, and the other end of the cable to the line out jack of the device you want to connect. Use the function keys of your audio device to pause and resume the playback, adjust the volume and select the next or the previous track. IMPORTANT NOTE: to use the AUX IN jack, the function selector must be set on the AUX- POWER OFF position. [. . . ] IMPORTANT NOTE: to use the AUX IN jack, the function selector must be set on the AUX- POWER OFF position. To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning. The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use a soft, clean cloth moistened with plain, lukewarm water to clean the exterior of the unit. [. . . ]