User manual LEXIBOOK METEOCLOCK SUNTIME

[. . . ] Displaying the date and month The date (DAY) and month (MONTH) is automatically displayed here. Symbols representing the weather forecast Animated symbols representing the weather forecast for the next 12 to 24 hours are displayed in this section of the screen: When an alarm has been set, an icon representing a bell is displayed here. Displaying the moon phases The moon phase is automatically updated here as per the year, month and day. Displaying the time of the sunrise and the sunset The time of the sunrise and the sunset is automatically updated according to the day of the year and the latitude of your home town. [. . . ] If this is not so, launch the signal search once more by holding the key down for 3 seconds. Reminder: the SM1660 will only receive the signal if you live in Europe (within the France and England time zones). Scrolling through the menus When you press the key, the menu will scroll by in the following order: Clock 1 mode (CLOCK 1) Clock mode (CLOCK ) Alarm 1 mode 1 1 Alarm mode 2 Indoor temperature alarm mode (the icon will appear and the temperature will begin to flash) Outdoor temperature alarm mode (the icon will appear and the temperature will begin to flash) Clock 1 mode. setting Clock 2 (second time indicator) · Press the key several times until CLOCK 2 appears to the right of the time. Press the key several times until the alarm 1 or 2 icon · Press the the bell symbol 1/ key to set the hour of the alarm. When an alarm rings, the corresponding icon · Key to repeat the alarm. If the alarm is not stopped manually, it will automatically stop ringing after one minute. Displaying the temperature in °C or °F In Clock 2 mode, press the key to switch the temperature display from degrees Celsius (°C) to degrees Fahrenheit (F°) and vice versa. Min and Max temperature and humidity Press the key several times in Clock 1 mode in order to scroll through the recordings of the minimum and maximum temperature and humidity. In Clock 1 mode, press and hold the key during 5 seconds to reset the recordings. HI & LO Display The "HI" and "LO" icons replace the temperature and humidity values onscreen when they fall outside the scale of transmission. Press the or keys to set your chosen limit for the indoor temperature. Press the or keys to set your chosen limit for the outdoor temperature. The alarm will automatically stop after one minute if no keys are pressed. The temperature alarm has a distinctive sound when it rings and is different to the sound of Alarms 1 and . The time of the sunrise and the sunset depends on the angle of the earth's axis and the movement of the planet around its orbit. Your MeteoClock® SM1660 station provides you with the exact time of the sunrise and the sunset in your city!This weather station actually calculates the time of the sunrise and the sunset according to the time of the year as well as the latitude and time zone of your city. Throughout the 28 days of the lunar month, the aspect of the moon changes. Indeed, the moon, being spherical, is always half lightened up by the sun. As the moon rotates around the Earth, the appearance of its lightened side changes continuously. The moon phase on your MeteoClock is automatically updated according to the year/ month/day. [. . . ] - Make sure remote sensor is away from sources of electrical disturbance. A- Reset the unit by replacing the batteries in both the transmitters and receiver. - Upstairs - In the baby's bedroom - In the basement - In the garden - In another room To order, phone the Lexibook office located in your country or browse www. In order to clean the unit, use only a soft cloth moistened with water; do not use any detergent product. [. . . ]