User manual LEXIBOOK METEOCLOCK ELEGANCE

[. . . ] Main unit back keys ** English C- Sensor unit ­ LCD Display B6 ­ +(12/24) button: to adjust the alarm clock and the alert, to select the 12/24 display mode. ** Located at the back of the main unit C1 ­ Channel number C2 ­ Automatic learn function icon C3 ­ Outdoor temperature C4 ­ Low battery indicator *** Located at the back of the sensor unit, inside the battery compartment. Your Meteoclock works with 2 AA batteries for the main unit and 2 AAA for the remote sensor (all not included). Main Unit: Use your finger to lift the battery door located at the back of the main unit. [. . . ] - "DST" appears on the LCD if the Daylight Saving Time mode has been activated. 12/24 Hour Display mode: Outside the manual time setting mode, press the [B6] key to select the 12 or 24 hours mode. Outside the manual time setting mode, press [B4] twice to scroll to the alarm. When the alarm rings, you can press the backlit button [A15] to activate the snooze alarm. If you wish to deactivate the alarm completely, you must turn it off (see step 6). Animated Weather Forecast Symbols This weather station is capable of detecting barometric pressure changes, and based on the data collected, predicting the weather for the next 8 to 12 hours. REMARKS: ÿ After having completed the settings of your weather station, please discard the readings of the weather forecast for the next 12-24 hours. This will allow sufficient time for the Weather Station to operate at a constant altitude and therefore result in a more accurate forecast. ÿ The remote sensor set on Channel 1 is used to help displaying the weather forecast icons (as well as the trend indicator). ÿ Absolute accuracy cannot be guaranteed regarding weather forecasting. ÿ The weather forecasting feature is estimated to have an accuracy level of about 75% due to the varying areas the Weather Station has been designed to be used in. Generally, bad weather is associated with low barometric pressure and fine weather with high pressure. As the higher pressure air cannot move in the low pressure area, it will move upwards, causing condensation of water in the air and producing clouds. The opposite is true for high pressure: in a high pressure area, air of lower pressure will move downwards, warming up the air and evaporating the water in the air. Use the [B6] and [B7] keys to select which temperature alert you wish to set: indoor temperature alert or outdoor temperature alert (channel 1, 2 or 3). Use the [B6] and [B7] keys to set the upper limit of the temperature alarm" " and press [B3] to confirm. Use the [B6] and [B7] keys to set the lower limit " " of the temperature alarm and press [B3] to confirm. For example, you can set the temperature alarm between 0°C and 35°C. Every time the remote sensor registers an outdoor temperature lower than 1°C or higher than 34°C, the temperature alarm will ring and [A9] will blink. It will ring for a few seconds, stop, and ring a few seconds later until it is turned off. After inserting new batteries or pressing and holding the [B7] key, the weather forecast icon will flash [A1]. Enter the current weather using the [B6] and [B7] keys to choose among the weather forecast symbols available. [. . . ] In order to clean the unit, use only a soft cloth moistened with water; do not use any detergent product. Remove the batteries if the unit is not going to be used for an extended period of time. To make use of the warranty or the after-sales service, please contact your retailer and supply proof of purchase. Our warranty covers material or installation-related defects attributable to the manufacturer, with the exception of wear caused by failure to respect the instructions for use or any unauthorised work on the equipment (such as dismantling, exposure to heat or damp, etc. [. . . ]