User manual LEXIBOOK LCD1SP

[. . . ] In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely. LASER SAFETY This unit employs an optical laser beam system in the CD mechanism, designed with built in safeguards. do not attempt to disassemble , refer to qualified service personnel. Exposure to this invisible laser light beam may be harmful to the human eye. [. . . ] The power indicator turns green and after a few seconds, the LCD screen will light up. Press one of the STANDBY keys once again to put the TV into standby mode. Note: the unit will automatically enter into standby mode after a few minutes of inactivity. Press the VOL /VOL keys on the TV or the VOL+/VOL- keys on the remote control to turn the volume up or down. The numeric keys of the remote control can be used to enter the channel number directly: · For a 1-digit program number, simple enter the required number. For a 2-digit program number, press the key, then the program number. RECALL Press the RECALL key to toggle between the last viewed channel and the current channel. Input source selection (DVD/TV/SCART/AV/S-VIDEO/PC-RGB) Press the INPUT key on the LCD screen or on the remote control to toggle between the different modes as below: Note: make sure all audio/video cables are connected. LCD settings menus In DVD, TV, SCART, AV, S-VIDEO or PC-RGB mode, press repeatedly the LCD-MENU key to enter the different settings menus : "TV MENU", "AUDIO MENU", "VIDEO MENU", "GENERAL MENU", "PC MENU" (for detailed information, refer to the "LCD MENU" section p. Audio effect (AMODE key) Press repeatedly the AMODE key on the remote control to select a sound effect as below: Press repeatedly the LCD-MENU key to enter the "VIDEO MENU". Use theand keys to select an option: "BRIGHTNESS", "CONTRAST", "COLOUR" or "SHARPNESS". The power indicator turns green and after a few seconds, the LCD screen will light up. Insert a disc in the disc slot with the label facing towards the back panel of the LCD screen. Make sure to insert the disc with the printed side facing the back of the LCD screen. During playback, press the key on the LCD screen or on the remote control to pause playback. During playback, press the key to return to the beginning of the previous chapter or track. Press this key repeatedly to change the search speed: "FORWARD x 2" "FORWARD x 4" "FORWARD x 8" "FORWARD x 20" "PLAY". Press this key repeatedly to change the search speed: "PLAY" "BACKWARD X 20" "BACKWARD X 8" "BACKWARD X 4" "BACKWARD X 2". DVD Play Menu Press the MENU key during playback to return to the Menu/Title page. During a DVD disc playback, press the TITLE key and use the/// keys to select a title. Repeat mode This function is applicable for DVD and CD audio but with different effects. For DVD disc playback, press the REPEAT key once to repeat the current chapter; twice to repeat the current title, and 3 times to repeat the entire disc. [. . . ] This player's digital output jacks are designed for a connection to a Dolby Digital, DTS or MPEG receiver or decoder. SPDIF / PCM Choose this setting if your DVD player is connected to a 2-channel digital stereo amplifier. When playing a disc recorded with Dolby Digital and MPEG audio formats, audio signal will be modulated into a 2-channel PCM signal and it will be output from the Coaxial Output jack or Optical Output jack. Note: To exit the menu, select "EXIT SETUP" and press ENTER or press the DVD-SETUP key at any moment. [. . . ]