User manual LEXIBOOK HPI500

[. . . ] Thank you for purchasing this Lexibook HPI500 MP3 Music Station with SmartSet. This compact system has been designed with a powerful amplifier and matching high fidelity speakers to produce the kind of sound that you would only expect from a much larger, more expensive audio system. There is a built-in iPod® docking station that allows you to play any dockable iPod® model* through the speakers of this system. in addition while your iPod® is installed in the docking station the internal iPod® battery will be recharged automatically. [. . . ] nOTES: · The FM memories are numbered "F 1" through "F 10". The AM memories are numbered "A 1" through "A 10". ⷠAfter you press the Memory button the first time you must select a Preset Memory number and press the Memory button again within 10 seconds, while the memory number is flashing, or the station will not be memorized. ) Press the Memory button and then press the Preset or buttons to select the Memory Number that you wish to change. The new station is now stored and the previous station is deleted from the memory. You may have to extend and vary the direction of the AC power cord until you find the position that provides the best reception. You may need to change the position of the main unit until you find the position that provides the best reception for your favorite AM stations. Listening To your "Dockable" iPod / Charging The Battery IMPORTANT!To prevent distortion during iPod playback you should go to the main Menu of your iPod, select the Settings Menu page, select the EQ Setting, and make sure that the EQ function is set to `Off'. You can connect any dockable iPod, available as of January 2006, to the docking station and play your iPod through the speakers of this system. When you "dockable" iPod is in the docking area, the power to your device is being supplied by this system, not by the iPod's internal battery. In addition when your iPod is switched `Off' while resting in the dock the internal iPod battery is automatically recharged. NOTE: To prevent any possible interference between the iPod and the Tuner in this system, the iPod battery is automatically switched `Off" while you are listening to the radio. When the radio is `Off' the battery charging circuit switches `On' again automatically of whether the power button of this system is `Off' or `On'. We recommend that you start with the power to this system switched `Off': 1. ) Open the docking area cover by gently pressing downward on the cover and sliding it backward. ) Select the correct adapter for your particular iPod model from among the 5 different adaptors included (See page 43). Place the selected adapter in the docking area so that the iPod 30-pin connector passes through the opening in the adapter. If you are using this system with an iPod nano will notice that the iPod 30-pin connector on this unit is not properly aligned with the opening in the ipod nano adapter. Before inserting the iPod nano adapter into the docking area you must slide the iPod 30-pin connector to the left position and then place the nano adapter into the docking area. After removing the nano adapter remember to slide the 30-pin connector back to the right position before attempting to install any iPod®adapter. ) After installing the necessary adapter in the docking area and making sure that it is locked in place, insert your iPod® into the adapter so that the 30-pin connector in the docking area is fully inserted into the 30-pin socket on the bottom of your iPod. [. . . ] If you do not change the built in lithium battery within a reasonable period of low" warning indicator, the lithium battery time after you see the flashing " may become exhausted and will no longer be able to supply back up power to the SmartSet® internal computer. If the unit is disconnected from the AC outlet after the battery is exhausted, or if a power interruption occurs, the SmartSet® memory will be lost and the clock will need to be reset when the power is restored. Be sure to install a fresh lithium battery before you reset the clock, otherwise the clock will need to be reset each time the power is interrupted. If the lithium battery is exhausted and you experience an interruption in the AC power supply, the clock will reset itself to its initial default setting when the power is restored. [. . . ]