User manual LEXIBOOK DVDP2TS

[. . . ] If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the unit. Unplug this unit during lightning storms or when unused for long periods of time. Servicing is required when the unit has been damaged in any way, such as the following: the power-supply cord or plug has been damaged; liquid has been spilled or objects have fallen into the unit; and/or the unit has been exposed to rain or moisture, does not operate normally, has changed its performance or has been dropped. [. . . ] note: · Please switch off the DVD player before you make any connections. Before using this product for the first time, please remove the static label from the LCD screen. Never use solvents such as benzene or other strong chemical cleaners since these could damage the unit's finish. Remove the disc from the case by holding it at the edges while pressing the centre hole lightly. If a disc becomes dirty, wipe it with a soft cloth in a straight line from centre to edge. Never allow your fingers to contact with the shiny, unprinted side of the disc. If a disc skips or gets stuck on a section of the disc, it is probably dirty or damaged (scratched). When cleaning the disc, wipe in straight lines from the centre of the disc to the outer edge of the disc. If the Region number described on the DVD disc does not correspond to the Region number of this DVD Player, this DVD player cannot play that disc This Region number of this DVD player is Middle-East). The on screen messages and operations may be different for any other type of discs. Hold the disc without touching either of its surfaces and place it on the tray with the printed title face up (for a Double-sided DVD Disc, put the disc with label A/1 up). TFT screen Press the TFT ON/OFF key to turn on or turn off the DVD player's TFT screen. Note: To save the energy of the built-in lithium battery, it is recommended to turn off the TFT screen when listening to an audio CD. Title For some DVD discs, you may press the TITLE key to display the title menu. Zoom This function enlarges or reduces a still picture or a moving picture. Note: To access all the setting menus, the disc must be completely stopped (press the STOP key twice). Use the direction keys ( / / / ) to navigate through the menus and to select the available options. To exit the setting menus page, select "Exit Setup Menu" and press or press the SETUP key at any time. Press SETUP, and use the and keys to highlight "General Setup Page". "4:3 Pan Scan": the sides of the image are cropped off to fit the proportions of a standard 4:3 aspect ratio television screen. If the "Angle Mark" option is turned on, when you press the ANGLE key during DVD playback, the OSD will display your selected angle constantly. If the option is turned off, the OSD will display your selected angle only for a few seconds. [. . . ] The remote control does not operate properly/ The player does not respond properly to the remote control. GENERAL Power source Power consumption External dimensions (LxWxH) Operating Temperature Operating position Operating humidity Weight SYSTEM TFT screen size Signal system Frequency response AC ~ 110V-240V 50/60Hz DC 9V 12W 215x175x40mm 5°C to 35°C (41°F to 95°F) Horizontal 5% to 90% 1, 1Kg 7 inch PAL/ NTSC CD: 20Hz-20KHz (EIAJ) DVD: 20Hz-22 KHz (48 KHz) (Sample result) 20Hz-44 KHz (96 KHz) (Sample result) more than 65db MPEG1 V2. To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning. The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. [. . . ]