User manual LERVIA KH 1270

[. . . ] · To avoid possible dangers, arrange for a defective appliance to be checked and possibly repaired by qualified technicians, or contact our Customer Service Department. · Arrange for defective power plugs and/or cables to be replaced at once by qualified technicians or our Customer Service Department. · To disconnect from the power spource, pull only on the plug itself, not on the cable. Arrange it in such a way that it can not come into contact with hot surfaces and such that no-one can step on it or trip over it. [. . . ] Provide for sufficient ventilation, for example, open a window. 0 1: 1 2: 1 3: 1 Operation Information · Should the care instructions in the clothing item forbid ironing (Symbol ), you may not use the steam brush on it. · Do NOT use the appliance on leather, velvet, impregnated furniture or steam sensitive materials. If you do, the material/furniture could become damaged. The water hardness level can be queried at your local water works. Attention! Before refilling with water, ALWAYS remove the plug 7 from the mains power socket!· Dismantle the water tank 1 by sliding the unlocking device 4 for the water tank 1 to the rear, until the water tank 1 allows itself to be lifted out. To lift the water tank 1 up, grasp it between your thumb and forefinger at the shaded markings. · Using the measuring beaker t, fill the water tank 1 with mains water to the "Max" marking, but no further. Ensure that the lug on the water fill opening 2 sits in the indentation on the lid. Only in this way is the water tank 1 properly closed. Filling with water Attention! NEVER fill the water tank 1 with chemical substances, cleaning agents or fluids other than mains water (or a mix of mains and distilled water) . This would irreparably damage the appliance. -4- · Replace the water tank 1 back onto the appliance. The water tank 1 must audibly engage with the unlocking device for the water tank 4. Attention! The steam brush can be used with all clothing items. Caution is to be exercised with heat-sensitive materials such as synthetics, polyamides or artificial silk. With these materials you should first check at a concealed part (inside seam) that the hot steam will not cause any damage to the garment. Do not touch these materials directly with the hot sole of the iron 0. Use only the steam blast. Attaching/detaching the brush attachment Attention! NEVER attempt to attach or detach the brush attachment w when the appliance is heated up. · To use the steam and brush function, place the brush attachment w onto the steam brush. · To do this, slide the brush attachment w all the way along the guide to the end. · To be able to use the ironing function, remove the brush attachment w from the steam brush. · To do this, press the unlocking device q downwards and, at the same time, pull the brush attachment w away to the front. Clothing care · Suspend the crumpled garment from a coat hanger. · With one hand pull the garment flat, then steam it from top to bottom. The combination of steam and clothes brush will gently remove all creases. · Use light pressure with the clothes brush and guide the appliance from top to bottom over the garment. You can thereby press the steam blast button 8 in short intervals. Notice: You can repeatedly press the steam blast button 8 until the heating-up control lamp 5 glows or water drips from the sole of the iron 0. [. . . ] Dispose of all packaging materials in an environmentally responsible manner. Storage Attention! Remove the plug 7 from the power socket and allow the appliance to cool down before putting it into storage. You can also hang the appliance up by the suspension eye 6. -7- Warranty & Service The warranty for this appliance is for 3 years from the date of purchase. This appliance has been manufactured with care and meticulously examined before delivery. Should a claim need to be made under the warranty, please make contact by telephone with our service department. [. . . ]