User manual LERVIA KH 4407 AUTOMATIC SHREDDER

[. . . ] Keep loose clothing , long hair and jewellery etc well away from the cutter opening. NEVER place a finger into the central hole of a CD when you are feeding it into the appliance. This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. Dispose of the material immediately after unpacking or keep it in a safe place not accessible to children. [. . . ] After the appliance has run for for this period it must be switched off until the motor has cooled itself down. Insert paper from above and in portrait format into the cutter opening for paper r. The motor starts automatically and switches itself off automatically if no further paper is inserted. Insert the credit card from above into the middle of the CD/Credit card cutter opening e. ALWAYS insert them into the CD/Credit card cutter opening e with the broad side leading. Note: Always insert the credit card into the middle of the cutter opening e. inserting a CD: · Insert the CD from above into the middle of the CD/Credit card cutter opening e. : NEVER place a finger into the central hole of a CD when you are feeding it into the appliance. clearing a material blockage: · Press and hold the switch w in position should the item to be shredded become jammed. The appliance now goes into reverse and the material to be shredded is returned. Place the switch w into position (OFF) as soon as the jammed item is returned. switching the appliance off: · To switch the appliance off, move the switch w into the middle position (OFF). Dispose of the waste material in an environmentally responsible manner. Emptying the large waste container (Paper) Important: Remove the power plug from the wall socket to avoid an unintended starting of the appliance. Remove the small waste container u at the front of the large waste container t, so that it does not fall out. Empty the large waste container t and then put everything back together again. emptying the small waste container (Plastic) · Remove the small waste container u from the front of the large waste container t to empty it. Notice regarding overheating of the appliance: If it overheats, the appliance switches itself off automatically. Important: Remove the power plug from the wall socket to avoid an unintended starting of the appliance. To switch the appliance off, move the switch w into the middle position (OFF). [. . . ] If the material to be shredded jams: This means that you have attempted to feed too much material into the appliance (max. Place the switch w in position should the item to be shredded become jammed. The appliance now goes into reverse and the material to be shredded is returned. If the appliance suddenly ceases operation: This means that the appliance has overheated and the automatic safety cut-out has activated itself. [. . . ]