User manual LERVIA KH 2424 STEAM CLEANER

[. . . ] Should the appliance, the power cable or the plug become damaged, to avoid personal risks arrange for it/them to be repaired by Customer Services. Always remove the plug from the power socket before filling the appliance with water, cleaning it or changing accessories. Fill the appliance using only the supplied funnel and measuring beaker! [. . . ] First carry out a test on an unobtrusive area to be certain that the material to be cleaned is suitable for high pressure steam, for instance: · Painted wood or leather can be bleached by steam. Cold glass or mirror surfaces can crack when sprayed with hot steam. If you wish to clean windows, you must first preheat them, for instance by applying the steam over large areas from a greater distance, then moving in progressively closer. Draw the glass attachment i in sweeps from top to bottom over glass surfaces. Wipe the rubber edge and the lower window border dry with a cloth after every sweep. To release it, press the locking button u down and pull the accessory off. To use the angle nozzle f or the round brush g, the narrow-jet nozzle h must first be attached. Remove the plug from the power socket, to avoid the risk of an electric shock. Note: The appliance is fitted with a safety mechanism which prevents the lid being opened q should there still be steam in the boiler t. Press the steam switch w until the steam in the boiler t has been completely released. Fill the appliance with a maximum of 320 ml of cold water using the measuring beaker s and funnel d. Warning: ALWAYS hold the device upright during use ­ never tilt the appliance to an angle greater than about 45 degrees (in any direction). You may now advance as close to the area to be be cleaned as the material itself can tolerate steam. Should the steam power diminish, it is an indication that the steam in the boiler t has all been used. Should no more steam come from the nozzle after a short period, the water has been completely used up. When the boiler is filled with water and the lid q is firmly closed: · Place the appliance on a tilt-safe even surface and insert the plug into a power socket. before cleaning the appliance , · Remove the plug from the wall socket. Press the steam switch w until the steam in the boiler t has been completely discharged. [. . . ] It has been carefully produced and meticulously checked before delivery. Contact your service centre by telephone in case of questions pertaining to the warranty. The warranty covers only material or manufacturing faults, not normal wear or damage to fragile parts such as switches or rechargeable batteries. [. . . ]