User manual LERVIA KH 1410 CYCLONE VACUUM CLEANER

[. . . ] Ensure that no humans or animals are likely to be caught by the vacuum cleaner!Before connecting to the power supply check that the electricity type and mains voltage matches the information given on the type plate. Disconnect the appliance from the power source before carrying out assembly, maintenance and care tasks!Before taking it into use, ensure that all components are assembled as per the operating instructions! [. . . ] When vacuuming, pay heed to the information providet by the floor covering manufacturer. Hold the power plug 9 firmly and press on the foot button for power cable rewind 8. Before every utilisation check to ensure that all filters are correctly inserted and that no openings are blocked. Pull the power cable 9 from the cable storage up to the yellow marking. If you do not intend to use the vacuum cleaner for an extended period, shorten the telescopic tube o as much as possible and place the storage hook i in the storage bracket 4. If you do not intend to use the vacuum cleaner for an extended period, empty the dust collector t and clean both it and the filters (see the chapters , , Filters" and , , Cleaning and care"). Empty the dust collector t at the latest when the MAX marking is reached or the suction power has noticeably diminished. This filter should be cleaned every two months (see chapter , , Lamellen filter"). Motor protection filter: Should the lamellen filter not function properly, the motor protection filter prevents larger dust particles from damaging or destroying the motor. exhaust filter: For filtering the smallest dust particles from the blown-out exhaust air. Before emptying the dust collector t, remove the plug 9 from the power socket. To take the lamellen filter out, proceed as follows: Before taking the filter out, remove the plug 9 from the power socket. Afterwards allow the lamellen filter and the filter grill to dry out (ca. Replace the lamellen filter and the filter grill only when they are both completely dry. Before taking the filter out, remove the plug 9 from the power socket. Take off the cover of the dust collector t with the lamellen filter and the filter grill . Take out the motor protection filter and remove the vacuumed in particles from the filter and the grill lying behind it. Should the motor protection filter be heavily soiled, rinse it thoroughly under clean running water. [. . . ] This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. Before starting to trace the error on the appliance yourself, absolutely remove the power plug 9 from the wall socket. If necessary, use a long pe tube o or the suction hose wooden stick for this. [. . . ]