User manual LENOXX PH543

[. . . ] 13 MEMORY CALLER ID TRIM PHONE MODEL PH-543 OPERATING INSTRUCTIONS CALLER ID SHOWS YOU CALLERS NAME & NUMBER 70 NAME & NUMBER CALLER ID MEMORY TONE/PULSE SWITCHABLE DIALING AUTOMATIC TIME & DATE DISPLAY ONE-TOUCH CALLER ID CALL BACK 3 ONE-TOUCH SPEED DIAL BUTTONS 10 TWO-TOUCH SPEED DIAL MEMORY LOCATIONS WALL/DESK USABLE USES 3 SIZE AA BATTERIES (NOT INCLUDED) TO USE THIS CALLER ID FEATURES OF THIS PHONE, YOU MUST SUBSCRIBE TO CALLER ID SERVICE, AND REMEMBER TO INSTALL BATTERIES. NOTE: READ AND FOLLOW THESE INSTRUCTIONS BEFORE USING YOUR TELEPHONE. IB-PH543(168F)-WM-E-051203 TABLE OF CONTENTS Battery Safety Instructions IB-PH543(168F)-WM-E-051203 Limited Warranty Trouble Shooting Wall Mounting Caller ID Features Understanding the Caller ID Service When You Receive a Call Viewing the Caller ID List Calling Back from the Caller ID List Storing Phone Numbers from the Caller ID List Deleting the Data from the Caller ID List Using Message Waiting / Mailbox Memory Dialing Storing Phone Number into Memory Making Calls with One-Touch Speed Dial Buttons Making Calls with Two-Touch Speed Dial Locations Getting Started Step 1: Checking the Package Contents Step 2: Telephone Installation Step 3: Setting up the Telephone Adjust the LCD Contrast Level Basics Making and Receiving Calls Volume Control and Ringer Setting Last Number Redialing / Pause & Flash Function Location of Controls FCC Information Important Safety Instructions 1 2 3 4 5 6 7 8 8 8 8 9 9 9 10 10 10 11 11 12 12 13 14 16 IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following: 1. Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool. Slots and openings in back or bottom of the phone are for ventilation, and should not be blocked or covered. [. . . ] When you finish talking, replace the handset into the base. RECEIVING A CALL 1. When you finish talking, replace the handset into the base. Volume Control and Ringer Setting Adjust the handset volume Adjust the ringer level Slide the VOLUME control to NORM. OFF - no ringing on incoming calls. If you have subscribed to the Caller ID service, the callers number and/or name will appear in the display when you receive a call. The last dialed number appears in the display and is automatically dialed. If you need a pause in a number, simply press the REDIAL/PAUSE button on your phone. (Example: In an office where you need to dial a 9 first to get an outside line), dial the number 9 and press the REDIAL/PAUSE button, and then dial the phone number. You may also store this into memory. Last Number Redialing / Pause Function Flash Function Useful for call waiting or getting a new dial tone. 8 IB-PH543(168F)-WM-E-051203 MEMORY DIALING You can quickly dial the numbers you stored into the 3 one-touch speed dial buttons or 10 two-touch speed dial memories. Press the STORE button, (short for programming) appears in the display. You can store up to 22 digits, including a TONE ( ) and a PAUSE (REDIAL/ PAUSE), each of which is counted as one digit. For one-touch dialing: Press one of the 3 onetouch speed dial buttons (M1 to M3). For two-touch dialing: Press the AUTO button, and then press one of the dialing keys (0 to 9) to store a phone number in. Storing Phone Number into Memory 4. Press the STORE button, and wait about 3 seconds to resume normal display. NOTE: When the batteries are dead or removed for more than 5 minutes, the stored numbers may be erased. NOTE: If you want to store a calling card number into one of your memories, you may do this the same way you program a phone number into memory. If you need a pause in a number, simply press the REDIAL/PAUSE button on your phone. NOTE: If you entered a wrong number, you may press the STORE button or HOOK switch, then start from the beginning. TO STORE A NUMBER TO BE DIALED VIA PRIVATE BRANCH EXCHANGE (PABX) Before entering a phone number in Step 2 in Storing phone number into memory, do as follows: 1. Press the REDIAL/PAUSE button (for a pause). TO CHANGE A STORED NUMBER Just store a new number, as described above, the old one will be erased automatically. Making Calls with One-Touch Speed Dial Buttons 1. The phone will dial the numbers you stored into it. Making Calls with Two-Touch Speed Dial Locations 1. Press the AUTO button first, then press the stored two-touch memory number (0 to 9). The phone will dial the numbers you stored into it. 9 IB-PH543(168F)-WM-E-051203 CALLER ID FEATURES Understanding the Caller ID service Caller ID allows the callers phone number to be shown on the display after the second ring of the call, also in most cases, the callers name, calling time and date. In order to enjoy this feature, you must first subscribe to the Caller ID service. To use the call back feature, set the area code (refer to page 7). When You Receive a Call The display as right illustrated will show all the information when you receive a call. [. . . ] Since the REDIAL/PAUSE button has combined Redial does not function (pause), the phone may have been work paused. Static noise on line, cannot hear calling party or calling party can not hear you 14 IB-PH543(168F)-WM-E-051203 TROUBLE SHOOTING (continued) PROBLEMS CHECK Pick up the phone before the second ring, or your phone received no information or unclear information. If this condition persists, contact display your local telephone company to ensure there is no problem with your phone line. The DELETE button must be quickly pressed twice to erase a single call record. [. . . ]